Sharp MX-M266N Operation Manual Download Page 54

Page: 54 / 794

1-13

BEFORE USING THE MACHINE

Contents

(3)

Bri

htness adjustment key

Touch this key to adjust the brightness of the touch
panel.
When touched, the following screen appears next to the
key.

Touch the [+] key or the [-] key to adjust the brightness.
When finished, touch the brightness adjustment key
again to close the screen.

NOTIFICATION INDICATOR

The data notification indicator (

) and the error indicator (

) lights solidly or blinks to indicate the status of the

machine.

“Pattern 1” and “Pattern 2” on the data notification indicator (

) can be set in the "Status Indicator Setting" in the

system settings (administrator).

This appears when the data security kit is
being used.

The icon appears when the machine is
communicating with an external application.

When a wireless LAN USB adapter is
connected to the machine

•

: Connected to an access point

•

: Not connected to an access point

•

: Waiting in ad-hoc mode

Tray

Error indicator (

) (red)

Data notification indicator (

) (

reen)

Pattern1

Pattern2

Solidly

Errors that do not stop machine
operation, such as almost out of toner.

Job in progress, such as paper feeding
or output.

Ready state or other state where jobs
can be accepted.

Blinks

Errors that stop machine operation,
such as misfeeds and out of toner.

Scanning an original or processing
data

Job processing in progress

Summary of Contents for MX-M266N



























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-M266N

Reviews:

Related manuals for MX-M266N

Brands by name

Popular brands

Sharp MX-M266N, Operation Manual

Search results

Summary of Contents for MX-M266N

Reviews:

Related manuals for MX-M266N

Brands by name

Popular brands