manualshive.com logo in svg

Sharp MX-M265N, Service Manual

The Sharp MX-M265N is a highly reliable multifunction printer designed to enhance productivity. To ensure optimal performance and maintenance, users can easily download the comprehensive Service Manual and user manual for free from our website. Empower your business with this powerful device and access the required manuals at manualshive.com.

Share
Download
background image

MX-M316N  TROUBLESHOOTING  7 – 8

 

E7-10

Shading error (Black correction)

 

E7-11

Shading error (White correction)

 

E7-14

CCD-ASIC error

 

E7-20

LSU laser detection error

 

E7-21

LSU LD deterioration trouble

 

E7-28

LSU control Asic connection error

 

E7-49

Water Mark data error

 

E7-50

PCU connection trouble

 

E7-55

PCU PWB information sum error

Trouble content

Detail

SCU

Cause

Abnormality in the CCD black scan level when the 
scanner lamp is turned OFF.
Improper installation of the harness to the CCD unit.
CCD unit abnormality.
SCU PWB abnormality.

Check & Remedy

Check connection of the harness to the CCD unit.
Check the CCD unit.
Check the SCU PWB.

Trouble content

Detail

SCU

Cause

Abnormality in the CCD white reference plate scan 
level when the scanner lamp is turned ON.
Improper installation of the harness to the CCD unit.
Dirt on the mirror, lens, and the reference white plate.
Scanner lamp lighting trouble.
Scanner lamp drive PWB trouble
CCD unit abnormality.
SCU PWB abnormality.

Check & Remedy

Check connection of the harness to the CCD unit.
Check connection of the harness to the scanner lamp 
unit.
Check or replace the scanner lamp.
Check or replace the scanner lamp drive PWB.
Clean or replace the mirror, the lens, and the 
reference white board.
Check or replace the CCD unit.
Check or replace the SCU PWB.

Trouble content

Detail

SCU

Cause

SCU PWB trouble.
Improper Installation of the harness to the CCD unit.
CCD unit abnormality.
SCU PWB abnormality.

Check & Remedy

Check the SCU PWB.
Replace the SCU PWB.
Check connection of the harness to the CCD unit.
Check or replace the CCD unit.
Check or replace the SCU PWB.

Trouble content

Detail

PCU

Cause

Laser optical axis misalignment
Reduced laser power, lighting error, laser diode 
trouble.
Disconnection or improper connection of harness and 
connector between LD PWB and MFPC PWB.

Check & Remedy

Use SIM61-1 to check the operation of the LSU.
Check connection of the connector and harness 
between the LD PWB and the MFPC PWB.
Replace the MFPC PWB.
Replace the LSU.

Trouble content

Laser trouble

Detail

PCU

Cause

Laser deterioration, power reduction
Disconnection or improper connection of harness and 
connector between LD PWB and MFPC PWB.

Check & Remedy

Use SIM61-1 to check the operation of the LSU.
Check connection of the communication connetctor 
between the LD PWB and MFPC PWB.
Replace the MFPC PWB.
Replace the LSU.

Trouble content

Access error between the CPU in the PCU PWB and 
the LSU control ASIC.

Detail

PCU

Cause

Improper connection of the communication connector 
between the PCU PWB and the MFPC PWB.
Harness trouble between the PCU PWB and the 
MFPC PWB
PCU PWB or MFPC PWB trouble.

Check & Remedy

Check connection of the connector and the harness 
between the PCU PWB and the MFPC PWB.
Replace the MFPC PWB.
Replace the PCU PWB.

Trouble content

Detail

MFP

Cause

Watermark data trouble.
HDD trouble.
* When the wartermark data is not installed, U2-60 

error occurs in booting.

Check & Remedy

Use SIM62-02/SIM62-03 to check HDD read/write.
If the result is NG, a remedy corresponding to E7-03 
is required.
Use SIM49-05 to update the watermark data. 
(Reinstallation)

Trouble content

Unknown PWB identification information is detected 
in the PCU PWB.

Detail

PCU

Cause

A PWB/firmware which does not comply with the 
machine specifications is connected.

Check & Remedy

Check the kind and the version of the firmware.
LSU connection trouble.
PCU PWB trouble.
LSU trouble.

Trouble content

PCU EEPROM PWB information sum error 

Detail

PCU

Cause

PCU EEPROM sum check error.
PCU EEPROM trouble.
PCU EEPROM contact trouble.

Check & Remedy

Replace the PCU PWB.
Replace the PCU EEPROM.

Summary of Contents for MX-M265N
























































































































































































































































































































Reviews:

No comments

Related manuals for MX-M265N

EBS 2500 Installation And First Startup preview
2500
Brand: EBS Pages: 4
NCR 7156 Setup And User Manual preview
7156
Brand: NCR Pages: 38
Panasonic KX-PS8000 Reference Manual preview
KX-PS8000
Brand: Panasonic Pages: 155
Panasonic KX-MB2061 Operating Instructions Manual preview
KX-MB2061
Brand: Panasonic Pages: 160
Xerox Document WorkCentre 480cx User Manual preview
Document WorkCentre 480cx
Brand: Xerox Pages: 318
Xerox Phaser 3010 User Manual preview
Phaser 3010
Brand: Xerox Pages: 76
Xerox ColorQube 9301 Quick Manual preview
ColorQube 9301
Brand: Xerox Pages: 11
Xerox ColorQube 9303 User Manual preview
ColorQube 9303
Brand: Xerox Pages: 352
Xerox Color 560 Printer Specification Sheet preview
Color 560 Printer
Brand: Xerox Pages: 2
Xerox B1022 System Administrator Manual preview
B1022
Brand: Xerox Pages: 105
Xerox AltaLink B8145 Manual preview
AltaLink B8145
Brand: Xerox Pages: 42
Xerox AltaLink B8145 Getting Started Manual preview
AltaLink B8145
Brand: Xerox Pages: 13
Xerox D110 Manual preview
D110
Brand: Xerox Pages: 132
Xerox CopyCentre C2128 Product Safety Data Sheet preview
CopyCentre C2128
Brand: Xerox Pages: 2
Xerox Legacy 4112 User Manual Supplement preview
Legacy 4112
Brand: Xerox Pages: 20
Xerox Legacy 4112 Quick Start Manual preview
Legacy 4112
Brand: Xerox Pages: 34
Xerox 700i Specification preview
700i
Brand: Xerox Pages: 8
Xerox 4890 Advanced Troubleshooting Manual preview
4890 Advanced
Brand: Xerox Pages: 70

Brands by name

Popular brands

Load more brands