manualshive.com logo in svg

Sharp MX-M265N, Service Manual

Share
Download
Sharp MX-M265N Service Manual Download Page 147

MX-M316N  SIMULATION  6 – 68

 

62-8

Purpose

Data clear

Function (Purpose)

Used to format the hard disk. (HDD:
Excluding the Operation Manual, the water-
mark data, and the system area)

Section

Operation/Procedure

1)

Press [EXECUTE] key.

2)

Press [YES] key.

Used to execute the hard disk format.

When the operation is completed, [EXECUTE] key returns to the
normal display.

* When the HDD formatting (except for the system area) is not

completed normally, "HDD FORMAT (EXCEPT SYSTEM AREA)
NG" is displayed.

 

62-10

Purpose

Data clear

Function (Purpose)

Used to clear the job completion list data.

Section

Operation/Procedure

1)

Press [EXECUTE] key.

2)

Press [YES] key.

Used to delete the job log data.

When the operation is completed, [EXECUTE] key returns to the
normal display.

 

62-11

Purpose

Data clear

Function (Purpose)

Used to delete the document filing data.

Section

Operation/Procedure

1)

Press [EXECUTE] key.

2)

Press [YES] key.

Used to delete the document filing data.

When the operation is completed, [EXECUTE] key returns to the
normal display.

 

62-12

Purpose

Setting

Function (Purpose)

Used to set Enable/Disable of auto format
in a hard disk trouble.

Section

Operation/Procedure

1)

Enter the set value with 10-key.

2)

Press [OK] key.

The set value is saved.

When it is set to Enable, if a read error of HDD occurs in the system
data storage area (FAX/device cloning data, etc.), only the system
data storage area is cleared.

 

62-13

Purpose

Data clear

Function (Purpose)

Used to format the hard disk. (Operation
Manual, watermark data only)

Section

Operation/Procedure

1)

Press [EXECUTE] key.

2)

Press [YES] key.

The operation manual data are deleted.

When the operation is completed, [EXECUTE] key returns to the
normal display.

 

62-14

Purpose

Data clear

Function (Purpose)

Used to initialize (remake) only the data-
base file of the HDD.

Section

HDD

Operation/Procedure

1)

Press [EXECUTE] key.

2)

Press [YES] key. 

The database file is initialized

When the operation is completed, [EXECUTE] key returns to the
normal display.

A

0

Enable

1

Disable (Default)

Summary of Contents for MX-M265N
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands