manualshive.com logo in svg

Sharp MX-M264N, Installation Manual, Page: 54 / 65

Share
Download
Sharp MX-M264N Installation Manual Download Page 54

MX-M264U  IC card reader  24 – 2

B. Attachment to the IC card reader holder

1)

Attach the card reader fixing tape to the IC card reader holder
referring to the notches as the reference.

NOTE:

The holder type and the attachment procedure differ
depending on the kind of the IC card reader.

Holder type B
RDR-6081AKU, TWN3, RDR-7582AKU

Vertical direction: Fit with the notch.
Horizontal direction: Fit with the notch and the lower edge.

Holder type C
Y591-EHID-201 v01

Vertical and horizontal directions: Fit with the notches.

2)

Cut out the boss.

Holder type B
RDR-6081AKU, RDR-7582AKU

NOTE:

Don't cut the boss in case of TWN3 installation.

3)

Attach the IC card reader to the IC card reader holder accord-
ing to the attachment reference ribs.

NOTE:

The attachment reference position differs depending
on the kind of the IC card reader.

Holder type B
RDR-6081AKU, RDR-7582AKU
(The attachment reference position is the same in case of
the above model.)

Holder type B
TWN3
(No reference position)

Summary of Contents for MX-M264N


































































Reviews:

No comments