Sharp MX-FR46U, Operation Manual

Page: 27 / 30

26
Document Control Setting
Combining the document control function with other functions
Function
combined with
document control
Operation of document control pattern printing
Exposure The pattern is always printed at the same exposure regardless of the exposure
setting.
Copy Ratio The pattern is always printed at the same ratio regardless of the ratio setting.
Duplex The pattern is printed on the back side as well as the front side when 2-sided
copy is performed. (The orientation of the original, tablet or book, is not taken
into account.)
Margin Shift The position of the pattern does not change when margin shift is used. (The
margin width does not affect the position of the pattern.)
Erase The pattern is printed normally on the edge or center that is erased.
Pamphlet Copy Printed based on the paper used for pamphlet copy.
Job Build The pattern is printed normally.
Transparency
Inserts The pattern is printed normally. (When an insert is copied on, the pattern is
printed in the same way as on a transparency.)
Multi Shot Printed based on the paper. When 2in1 is selected, 2 original pages are printed
on 1 sheet of paper. The pattern is printed normally on the sheet of paper even
when 2in1 or 4in1 printing is performed.
Card shot/
ID card copy The pattern is printed once each time the front side and the back side of the
original are scanned.
Stamp If the pattern and the stamp item overlap, the pattern is given priority.
Photo Repeat The pattern is printed once for one scan of a photo.
Mirror Image The pattern is printed in the normal orientation without being inverted.
Centering The pattern is printed normally.
B/W Reverse Patterns are printed normally without black/white inversion.
Bus. Card Scan The pattern is printed normally.
Other functions The pattern is printed normally when RGB Adjust, Sharpness, Suppress
Background, Color Balance, Brightness and/or Intensity settings are used.