Sharp MX-B200 Operation Manual Download Page 5

Page: 5 / 91

OPERATION PANEL

Sort key and indicators

Use to select sort mode.

Exposure mode selector key and
indicators

Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.28)

Light and dark keys and indicators

Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level
is shown by a lit indicator. (p.28) Use to
start and terminate user program
setting. (p.63)

Alarm indicators

Developer replacement required
indicator (p.86)

Misfeed indicator (p.80)

Toner cartridge replacement
required indicator (p.66)

Maintenance

indicator (p.86)

SPF indicator*

(p.27)

SPF misfeed indicator*

(p.84)

Copy ratio selector key*

and

indicators

Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.30)

Copy ratio display (%) key/
READ-END key

• Use to verify a zoom setting without

changing the zoom ratio. (p.30)

• Use to check the number of originals

that must be returned to the document
feeder tray if a misfeed occurs in the
machine when the SPF is used. (p.85)

• Use to terminate reading originals in

sort mode. (p.31)

Display

Displays the specified copy quantity,
zoom copy ratio, user program code
and error code.

SCAN key and indicator
(p.6, p.50)

ID CARD key and indicator

Use to copy ID card. For description,
see "ID CARD COPY" (p.34).

Start key and indicator

• Copying is possible when the

indicator is on.

• Press to start copying
• Use to set a user program. (p.63)

Power save indicator

Lights up when the unit is in a power
save mode. (p.61, p.63)

Tray select key

Use to select a paper feed station
(paper tray 1, paper tray 2*

or multi-

bypass tray). (p.30)

Paper feed location indicators

Light up to show the selected paper
feed station.

*1 Only operates when an SPF is

installed.

*2 Peripheral device
*3 The indicators of the operation panel

may differ depending on the country
and region.

Summary of Contents for MX-B200




























































































Search results

Summary of Contents for MX-B200

Reviews:

Related manuals for MX-B200

Brands by name

Popular brands

Sharp MX-B200, Operation Manual

Search results

Summary of Contents for MX-B200

Reviews:

Related manuals for MX-B200

Brands by name

Popular brands