Sharp MX-7000N Manual Download Page 9 | Manualshive

Page: 9 / 50

background image

Copyright © 2006 MCA Internet, LLC dba BERTL. All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any

portion of this document. This document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is

strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.

Office

E x c e p t i o n a l

O

FF

IC

E

Sharp MX-7000N

page 9 • September 1, 006

Back to Contents

The paper output handling options on workgroup products
can range from duplex output to saddle-stitch booklet mak-
ing capabilities. Many devices offer a choice of finishers
providing a low-cost, minimum footprint solution, or a high
capacity, fully-featured solution.

Stapling

Lower cost stapler units often have a 15- to 30-sheet maximum capacity
and are often limited to corner stapling. Floor-standing, higher cost finish-
ers should offer 50-sheet capability and handle corner and double stapling.
Saddle stitching heads up the finishing capabilities, allowing users to cre-
ate folded, center-stapled booklets. Some workgroup device saddle-stitch
finishers only handle 10 sheets (40-page booklets) with others handling up
to 15 sheets (60-page booklets).

Mail Bin Units and Offset Output

Many workgroup devices offer offset stacking (where each set is offset
from the next) to make it easier to separate jobs. Some offer physical mail
bin units allowing each user to send jobs to their own output area. Most
mail bin units limit delivery to unfinished jobs. A multi-tray finisher can also
offer some form of job separation, typically used to route different types of
job (fax, print, copy) for easier identification.

Finishing Options

The Sharp MX-
7000N has a variety
of finisher options.
The three position
finisher offers dual
output trays, corner
staples, side staples,
and two staples.

The saddle-stitch

finisher offers dual
output trays, a book
output tray, two
staples, and up to
15-sheet capacity
(60 page booklets)
saddle-stitch book-
lets. A paper pass unit
is required with the
above finishers. A hole
puncher unit which
offers 2/3 hole punch (2/4 in some markets) can be added to the above
finishers.

The floor-standing post-process insertion finisher, which is used to

impose finishing options onto post-printed pages without going through
the fuser unit, can be added to the device. It includes a 100-sheet capacity
output tray, multi-position stapling for up to 50 sheets, and an optional hole
punch.

Paper Handling: Paper Output/Finishing

Paper Handling:

Output/Finishing

Features Summary

Maximum
Output
Capacity

4,000 sheets:

2 trays w/finisher

100 sheets:
right output tray

Duplex
Capability

Standard

Maximum
Paper
Weight
Through
Duplex Unit

110 lb. Index/200gsm

Maximum
Stapling
Capacity

50 sheets

Maximum
Booklet/
Saddle-stitch
Capacity

15 sheets
(60-page booklet)

Hole Punch
Options

2/3 hole
(2/4 in some markets)

Physical Mail
Bin Option

Two output areas

via finisher or job

separator options

One right-side
output tray

Folding Options

In booklet making
only

All post-printing finishing tasks can be performed through the

inserter unit.

«
...
7
8
9
10
11
...
»

Summary of Contents for MX-7000N



















































Reviews:

No comments

Related manuals for MX-7000N

WORKCENTRE 5050

Brand: Xerox Pages: 186

Brand: Xerox Pages: 418

Brand: Olivetti Pages: 74

OKIPAGE 8p Plus

Brand: Oki Pages: 18

Brand: Radio Shack Pages: 42

Brand: Oki Pages: 2

4250 - WorkCentre - Copier

Brand: Xerox Pages: 4

Brand: Oki Pages: 188

Brand: Novexx Solutions Pages: 6

LaserPro X500 III-80Y

Brand: GCC Technologies Pages: 127

Brand: Oki Pages: 9

Brand: Lexmark Pages: 221

Brand: Ricoh Pages: 23

Expression Photo XP-750

Brand: Epson Pages: 187

Expression Photo XP-950

Brand: Epson Pages: 300

Expression Photo XP-960

Brand: Epson Pages: 325

Brand: Xerox Pages: 16

Expression Photo XP-950

Brand: Epson Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands