manualshive.com logo in svg

Sharp MX-2630N, User Manual, Page: 631 / 944

Share
Download
Sharp MX-2630N User Manual Download Page 631

5-98

SCANNER/INTERNET FAX►OTHER FUNCTIONS

5

Tap 

 or slide the slider to adjust 

the sharpness.

After the settings are completed, tap 

 and [Back] keys in 

sequence.

To cancel the sharpness setting:

Tap the [Off] key.

6

Tap the [Start] key to start scanning of the original.

• If you inserted the original pages in the document feeder tray, all pages are scanned.

A beep will sound to indicate that scanning and transmission have ended.

• When you place the original on the document glass, scan each page one at a time.

When scanning finishes, place the next original and tap the [Start] key. Repeat the procedure until all pages have 
been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.

You can tap the [Preview] key to check a preview of the image before sending an image. For more information, see 
"

CHECKING THE IMAGE TO BE TRANSMITTED (page 5-68)

". However, settings for this function cannot be changed 

in the preview screen.

Preview

Start

Back

Others

Colour Mode

Sharpness

Off

On

Specify Send Exposure

Exposure

1

2

3

5

4

Adjust Contrast of Image

Contrast

Change Sending Resolution

Resolution

Less Sharp

More Sharp

CA

Summary of Contents for MX-2630N

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments