Sharp MX-2630N User Manual Download Page 295

Page: 295 / 944

2-129

COPIER►OTHER FUNCTIONS

ADJUSTING RED/GREEN/BLUE IN COPIES (RGB

ADJUST)

This function heightens or lightens any one of the three colour components R (red), G (green), and B (blue).

RGB must be specified before scanning the original.

Tap the [Others] key, and tap the [RGB Adjust] key.

Tap the key of the colour you want to adjust.

Tap

or slide the slider to adjust

the colouring.

After the settings are completed, tap

and [Back] keys in

sequence.

• Only one colour can be adjusted. (If you adjust one colour and then tap another colour, the adjustment of the first

colour is cancelled.)

•

To cancel the RGB adjust setting:

Tap the [Off] key.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.

► AUTOMATIC DOCUMENT FEEDER (page 1-82)
► DOCUMENT GLASS (page 1-84)

To cancel all settings:

Tap the [CA] key.

Tap the [Colour Start] key to start copying.

R(Red)+

G(Green)+

B(Blue)+

Others

Preview

Start

Colour
Start

Back

RGB Adjust

Only one colour can be adjusted.
This setting is only applied to colour.

Colour Mode

Off

R(Red)

G(Green)

B(Blue)

Touch [+] to darken and [-] to lighten
selected colour tone.

-1

-2

Change Size/Direction.

Original

Exposure

Select Type/Exposure

Colour Balance

Adjust colour Tone

Intensity

Adjust Intensity

B/W

Summary of Contents for MX-2630N

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-2630N

Reviews:

Sharp MX-2630N, User Manual, Page: 295 / 944

Search results

Summary of Contents for MX-2630N

Reviews: