MD-R2
– 20 –
e) TEMP setting
Step 1
Testmode STOP state
[ t s m
e
]
Step 2
Press the ENTER button seven times.
EEPROM setting menu
[E E P R O M _ S E T]
Step 3
Press once the MD PLAY button. Focus setting menu
[ _ _ F o c u s _ _ _ ]
Step 4
Press the ENTER button four times.
TEMP setting menu
[ _ _ _ T e m p _ _ _ ]
Step 5
Press once the MD PLAY button. TEMP reference value setting
[ T E M P _
_
]
Step No.
Setting Method
Remarks
Display
•
: Setting volue,
:
Measurement value
• When the jog key is turned upward while the setting is displayed, the setting increases, and a new setting is stored in LSI.
• When the jog key is turned downward while the setting is displayed, the setting increases, and a new setting is stored in LSI.
Step 1
EJECT state (or mechanism-less state)
[ _ _ E J E C T _ _ _ ]
Step 2
Press the DELETE/CLEAR button. TEMP reference value setting
[ T E M P _
_
]
Step No.
Setting Method
Remarks
Display
f) CONTROL setting
Step 1
Testmode STOP state
[ t s m
e
]
Step 2
Press the ENTER button seven times.
EEPROM setting menu
[E E P R O M _ S E T]
Step 3
Press once the MD PLAY button. Focus setting menu
[ _ _ F o c u s _ _ _ ]
Step 4
Press the ENTER button five times.
CONTROL setting menu
[ _ C o n t r o l _ _ ]
Step 5
Press once the MD PLAY button. CONTROL 1 setting
[ C O N T R L 1_
]
Step 6
Press once the ENTER button.
CONTROL 2 setting
[ C O N T R L 2_
]
Step 7
Press once the ENTER button.
Setting of spin kick level in MOVE state
[ S P K L E V m_
]
Step 8
Press once the ENTER button.
Setting of readjustment interval time (minutes)
[ A D J T T M_ _
]
Step 9
Press once the ENTER button.
Setting of equalizer coefficients A and D (high reflection)
[ H D E Q A D_ _
]
Step 10
Press once the ENTER button.
Setting of equalizer coefficients A and D (low reflection pit)
[ L D E Q A D_ _
]
Step 11
Press once the ENTER button.
Setting of equalizer coefficients A and D (low reflection groove)
[ G D E Q A D_ _
]
Step 12
Press once the ENTER button.
Setting of equalizer coefficients B and C (high reflection)
[ H D E Q B C_ _
]
Step 13
Press once the ENTER button.
Setting of equalizer coefficients B and C (low reflection pit)
[ L D E Q B C_ _
]
Step 14
Press once the ENTER button.
Setting of equalizer coefficients B and C (low reflection groove)
[ G D E Q B C_ _
]
Step 15
Press once the ENTER button.
Setting of autolevel slicer gain (high reflection)
[ H A L S G_ _ _
]
Step 16
Press once the ENTER button.
Setting of autolevel slicer gain (low reflection pit)
[ L A L S G_ _ _
]
Step 17
Press once the ENTER button.
Setting of autolevel slicer gain (low reflection groove)
[ G A L S G_ _ _
]
Step 18
Press once the ENTER button.
Setting of autolevel slicer offset (high reflection)
[ H A L S O F_ _
]
Step 19
Press once the ENTER button.
Setting of autolevel slicer offset (low reflection pit)
[ L A L S O F S_
]
Step 20
Press once the ENTER button.
Setting of autolevel slicer offset (low reflection groove)
[ G A L S O F S_
]
Step No.
Setting Method
Remarks
Display
Step 1
EJECT state (or mechanism-less state)
[ _ _ E J E C T _ _ _ ]
Step 2
Press the NAME/TOC EDIT button. CONTROL 1 setting
[ C O N T R L 1_
]
Step 3
Press once the ENTER button.
CONTROL 2 setting
[ C O N T R L 1_
]
Step No.
Setting Method
Remarks
Display
•
: Setting volue
• When the jog key is turned upward while the setting is displayed, the setting increases, and a new setting is stored in LSI.
• When the jog key is turned downward while the setting is displayed, the setting increases, and a new setting is stored in LSI.
• CONTROL 1
Pit 7
: High frequency superposition ON/OFF in record mode (0:OFF, 1:IN)
Pit 6~4
: Play start SD number (30 to 100 sector, 10 sector step)
Pit 2~0
: High speed jump over-run (384 to 830 lines, 64 lines step)
• CONTROL 2
Pit 4~0
: EEPROM version (a~)