LCY01023−12
(10)Mechanical characteristics
10-1) External appearance
Do not exist extreme defects. (See Fig. 1)
10-2) Panel toughness
The panel shall not be broken ,when 19N is pressed on the center of the panel by a smooth
sphere having 15 mm diameter.
Caution: In spite of very soft toughness, if, in the long-term, add pressure on the active area, it
is possible to occur the functional damage.
10-3) Input/output connector performance
A)Input/output connectors for the operation of LCD module
(32 pin
【
J.S.T . MFG CO.,LTD
】
:) 32FLZ RSM1
−
R
−
TB
1)Applicable FPC refer the below figure
2)Terminal holding force : More than 0.9N/pin
(Each terminal is pulled out at a rate of 25
±
3mm/min.)
3)Insertion/pulling :contact resistance is not twice larger than the durability initial value after
applicable FPC is inserted and pulled out 20 times
16.5 + 0.05
- 0.05
0.3 + 0.03
- 0.03
3.
0 M
IN
5.
5
４
１
２
３
0.35 + 0.04
- 0.04
0.5 + 0.1
- 0.1
0.5 + 0.03
- 0.03
(R0.2)
No. Name
Materials
1 Base
material Polyimide or equivalent material(25
μ
m thick)
2 Copper
foil
Copper foil(35
μ
m thick) Solder plated over 2
μ
m
3
Cover lay
Polyimide or equivalent material
4 Reinforcing
plate
Polyester polyimide or equivalent material(188
μ
m thick)
FPC applied to input/output connector (0.5mm pitch)
sharp
