Sharp LC60LX849H Page 62 Operation Manual Download

Page: 62 / 102

Settings when using external devices

Press

TV/VIDEO

on the remote control unit or

on the TV to select the input source.

• The image and sound from the selected source

are output on the TV.

• You can also select the input source by pressing

Press

TV/VIDEO

on the remote control unit or

on the TV.

HOME

MPX

RETURN

EPG

INFO TEXT

HOME

MPX

RETURN

EPG

INFO TEXT

Can use for selecting the input source.

Using

TV/VIDEO

on the remote control unit or on

the TV.

TV/VIDEO

allows you to choose from the available

input sources.

Selecting the input source

This system is using the HDMI CEC (Consumer

Electronics Control) technology.

What you can do with CEC capable

using HDMI devices

Single remote control operation

The TV automatically recognises the connected HDMI

devices and you can use the remote control provided

with this TV to control the TV and the relative devices

at the same time. (See page 64 to 69)

NOTE

• Point the remote control toward the TV, not to the

connected HDMI device.

• Video noise may occur depending on the type of HDMI

cable used. Make sure to use a certified HDMI cable.

• These operations affect the HDMI device selected as the

current input source. If the device does not operate, turn

on the device and select the appropriate input source using

TV/VIDEO

• When you insert/remove HDMI cables or change

connections, turn on all connected HDMI devices before

turning on the TV. Confirm that picture and audio are

correctly output by selecting “HDMI 1(ARC)”, “HDMI 2”,

“HDMI 3” or “HDMI 4” from the “INPUT SOURCE” menu.

Controlling HDMI devices

Audio select for connecting HDMI

When connecting HDMI to the HDMI 2 terminal, and

inputting analogue audio signals from the AUDIO IN

terminal.

Go to “MENU”

“Setup”

“Option”

“Terminal

setting”

“Audio select”.

Selected item

Description

HDMI (Digital)

When connecting devices with HDMI

cable to the HDMI 2 terminal.

HDMI +

Analogue

When connecting devices with HDMI

cable to the HDMI 2 terminal and

inputting analogue audio signals from

the AUDIO IN terminal.

NOTE

• When connecting an DVI-HDMI conversion adaptor/cable

to HDMI 2 terminal, you must set to “HDMI+Analogue”. If

“HDMI (Digital)” is set, there will be no sound output.

Summary of Contents for LC60LX849H







































































































Search results

Summary of Contents for LC60LX849H

Reviews:

Related manuals for LC60LX849H

Brands by name

Popular brands

Sharp LC60LX849H, Operation Manual

Search results

Summary of Contents for LC60LX849H

Reviews:

Related manuals for LC60LX849H

Brands by name

Popular brands