44
Watching TV
Wallpaper setting
w
Timer setting
w
Data source
For the wallpaper, you can select either the still images
pre-installed in the TV or your favourite still images
stored in the USB device.
This function is available only when “Quick start” is set
to “On (Wallpaper)”.
Press “POWER” of the R/C to start or end the
wallpaper, if you want to quit the wallpaper, please set
the “Quict start” to “Off” or “On”.
Activating the function will display still images when the
TV is in standby mode.
NOTE
• Images are displayed as a slideshow in 3-minute intervals.
• As a USB device cannot be detected immediately after
the TV is turned on from standby mode, the wallpaper
pre-installed in the TV may be displayed even when “Data
source” is set to “USB”.
When you display images by using the USB device:
• Create a folder named “WP” in the root directory of the
USB device (the first directory when the USB device is
opened), and store into the folder the still images you want
to display for the wallpaper.
• You must insert the USB device into the USB terminal
before turning off the TV.
You can set the length of time the TV will remain in the
Wallpaper mode (3 hours/6 hours/12 hours/24 hours).
NOTE
• Setting “Quick start” to “On” consumes more power.
• No buttons except for “POWER”
work even while the still
images are being displayed.
• If the ready-for-use USB device is not inserted, the still
images pre-installed in the TV will be displayed in a
slideshow even when “Data source” is set to “USB”.
• The still images will be displayed until the set time has
elapsed.
• If you do not want to use the wallpaper as described
above, set “Quick start” to “On” or “Off”.
Boot picture
With this function activated, the SHARP logo will be
displayed when you turn on the TV.
Selected item
Selected item
Pre-installed
The images pre-installed in the TV will
be displayed in a slideshow.
USB
Images stored for the wallpaper will
appear.
If only a single still image is stored in
the USB device, that image will be
displayed as the wallpaper. When there
are multiple still images in the memory,
all the images will be displayed in a
slideshow.
Press
MENU
and the MENU screen displays.
1
Press
a
/
b
to select desired items, and then
press
ENTER
.
4
Press
b
/
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Wallpaper setting” , and
then press
ENTER
.
3
Press
MENU
and the MENU screen displays.
1
Press
a
/
b
to select desired items, and then
press
ENTER
.
4
Press
b
/
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Boot picture” , and then
press
ENTER
.
3
NOTE
• This function is not available when the "Quick Start" is set
to "On" or "On(wallpaper)".
