45
Removing the stand
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
CAUTION
•
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
NOTE
• To attach the stand, perform the above steps in reverse order.
Setting the TV on the wall
CAUTION
• Installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Vertical mounting
Angular mounting
Hanging on the wall
Wall mount bracket. (See the bracket instructions for details.)
Appendix
2
Unfasten the four screws
used to secure the stand in
place.
1
Unfasten the screw used to
secure the bracket in place.
3
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of the
base area.)
(LC-32DA5U)
* Start from step 2 for the 26 inch model to unfasten the
screws. Note that the shape of each stand differs.
(LC-26DA5U)
LC-26/32DA5U(E)-45-53
05.7.15, 8:23 AM
45
