Sharp LC-65D90U, Operation Manual

Page: 39 / 90

38
Basic adjustment settings
Channel memory setting
Press MENU and the MENU screen displays.
Press
c
/
d
to select “Setup”.
1
2
3
4
Press
a
/
b
to select “CH Setup”, and then
press ENTER .
• If you already set the Secret No., input the 4-
digit secret number here. See page 68 for
setting a secret number.
Press
a
/
b
to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) and CableCARD, and then
press
ENTER .
5
6
Press a / b to select “CH Memory”, and then
press ENTER .
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
1
Press
a
/
b
, and then press
c
/
d
to select
the channel to skip or not.
2
Press
a
/
b
to select “Skip”, and then press
c
/
d
to select “On” or “Off”.
When viewing DIGITAL broadcasts:
1
Press
a
/
b
to select the channel to skip or
not, and then press
c
/
d
to select “On” or
“Off”.
• On: Skips channels. (Channel selection disabled using
CH
r r r r r
/
s s s s s
.)
• Off: Does not skip channels. (Channel selection enabled
using CH r r
r r r
/ s s
s s s
.)
NOTE
• Make sure what kind of connection is made with your TV.
Antenna Setup – DIGITAL – Air
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL”
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
1
2
Press MENU and the MENU screen displays.
Press
c
/
d
to select “Setup”.
Press
a
/
b
to select “Antenna Setup -
DIGITAL”, and then press ENTER .
• If you already set the Secret No., input the 4-
digit secret number here. See page 68 for
setting a secret number.
4
3
Press
a
/
b
to select “Signal Strength”.
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
Signal Strength
Channel Strength
Signal Strength
Current Max 0 0
Signal Strength
Press
a
/
b
to select “Channel Strength”, and
then press ENTER .
Input the 2-digit channel number to check
the signal strength of the selected channel.
• Make sure the appropriate signal strength of
each channel received is obtained.
Signal Strength
Current
CH
Max 0
1 2
0
Signal Strength
Channel Strength
Channel Strength
• The channel signal strength can also be checked
separately.
2
3
1
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL - Air .
NOTE
• This function is available for DIGITAL (Air) only.