LC-60G9T / LC-70G9T
5 – 21
5. On Setting Items
1) Power ON fixed [POWER ON FIXED]
If the power button is pressed in the ordinary mode in setting to “FIXED_ALL” and “FIXED_BODYKEY”, the caution is displayed for 5 seconds.
*
The OSD display is an example.
If another ODS is previously displayed, the status is reset (MENU or similar).
2) Instantaneous current shutdown setting in turning off the power [SHUT DOWN MODE]
3) Volume maximum level [MAXIMUM VOLUME]
Option
“VARIABLE”, “FIXED_ALL”, “FIXED_BODYKEY” or “RCRESPOND” (loop enabled)
Default
“VARIABLE”
Function
•
VARIABLE
•
FIXED_ALL
•
FIXED_BODYKEY
•
RC RESPOND
: “POWER/RECEPTION” key on TV unit or remote control is enabled.
: “POWER/RECEPTION” key on TV unit or remote control is disabled.
: Only the “MAIN POWER” key on TV unit is disabled (The remote control is enabled).
: The main unit’s POWER switch toggles between ON and Standby (the same operation by the
remote control).
Key disabled when set
other than default
•
OFF TIMER (SLEEP) (*Only when setting to FIXED_ALL)
Remarks
•
When selecting to “FIXED_ALL”, function related standby factors (see below) doesn’t work. and not selecting.
OFF TIMER (Sleep)
No operation OFF
No signal OFF (including the power management)
*
These items does not exist according to the model.
Option
“NORMAL” or “QUICK”
Default
NORMAL
Function
•
This function decides whether scanning digital tuner is enabled or disabled when the power is standby.
NORMAL
QUICK
: Scanning digital tuner is enabled when the power is standby.
: Scanning digital tuner is disable.
It is possible to put into the standby state instantaneously due to power off input, when the
power is standby.
Immediately, state is a complete standby.
Remarks
In selecting “QUICK”, the function does not work for the following items. (selection impossible.)
•
ON TIMER, QUICK START, DIGITAL FIXED, etc.
*
These items does not exist according to the model.
Option
0~100 (loop disabled)
Default
100
Function
The volume cannot be increased more than the adjusted value (the main unit’s speaker only).
Remarks
•
When setting to 59 or less, only the figure is displayed in the normal mode; the volume bar is not displayed.
•
The volume of the headphones is limited.
•
The setting is impossible when VOLUME FIXED is set to FIXED.
When power button on the main unit is pressed
When power button on R/C is pressed
No Power off by power button.
No Power off by remote control.
Summary of Contents for LC-60G9T
