Sharp LC-46HD1E Operation Manual Download Page 5

Page: 5 / 64

Supplied accessories

Preparation

Attaching the speaker unit

• Before attaching (or detaching) the speaker unit, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

Connect the ends of the cables to the speaker
terminals as shown.

Connect the leads to the speaker terminals of
the same colour.

NOTE

• To detach the speaker unit, perform the steps in reverse

order.

Screwdriver

Screw

Soft cushion

Red

Black

Confirm that there are 4 screws and a
screwdriver supplied with the speaker unit.

Insert the projections on the speaker unit into
the corresponding slots on the TV, then fasten
the screws.

Insert and tighten the 4 screws with the
screwdriver in the order of

and

Remote control unit

(

AC cord (

Cable tie (

Stand unit (

Speaker unit (

Cable clamp

(Small

1, Large

Screwdriver (

Stand hole cover (

Pages 7 and 8

Page 5

Page 4

Page 3

Cloth (

Page 5

Page 4

Page 3

Page 5

• Operation manual (This publication)

• “AAA” size alkaline battery (

(For Europe, except

U.K. and Eire)

(For U.K. and Eire)

LC-52HD1E-gb.indd 3

2008/03/24 15:00:29

Downloaded From TV-Manual.com Manuals

Summary of Contents for LC-46HD1E

































































Search results

Summary of Contents for LC-46HD1E

Reviews:

Related manuals for LC-46HD1E

Brands by name

Popular brands

Sharp LC-46HD1E, Operation Manual

Search results

Summary of Contents for LC-46HD1E

Reviews:

Related manuals for LC-46HD1E

Brands by name

Popular brands