Navigating the Digital recorder
menu
You can use the Digital Recorder with the default
values set at the factory.
This section explains how to customise these values
to meet your own preference. To change the settings,
first call the Digital Recorder menu screen as explained
below.
Press
RED
to display the DR archive menu.
SHARP Demo
DR archive
free capacity 48:42 hrs
While in the DR archive menu screen, press
MENU
to display the Digital Recorder menu
screen.
DR continuous operation
on
off
Digital Recorder menu
Recording quality
high
Inform about hidden sections
yes
Jump distance
02
Smart jump
yes
Serial recording tolerance
+-30
Record subtitles
Yes, DVB subtitles preferred
Press
a
/
b
to select the desired item.
Press
c
/
d
to select the desired parameter or
enter value with
0 - 9
.
Items
Description
Defaults
DR continuous
operation
If DR continuous operation
is switched on, recording is
continuous to permit time-shift
viewing.
on
Recording quality
Adjust the recording quality
for recording analogue
programmes. This results in
a change in the recording
capacity.
high
Inform about hidden
sections
If a section has been hidden in
an existing archive recording
you can choose whether to be
advised of this by a message
or not.
yes
Jump distance
For time-shift viewing and for
playing archive recordings
you can set a jump distance
(in minutes), so that you can
jump forwards or backwards
in the programmes by
pushing the buttons
G
or
J
briefly. Enter the time
with the numeric buttons on
the remote control (always
enter two digits for 01 to 15
minutes).
yes, 02 min
1
2
3
4
HDD Digital Recorder operation
Items
Description
Defaults
Smart jump
By using the Smart jump
function, you can quickly and
easily find a certain point in
the recording (a time shift or
in the archive). Every time the
direction is reversed when
jumping using the buttons
G
or
J
, the jump
distance is cut in half. Refer
to the next page for more
information on this application.
yes
Serial recording
tolerance
To avoid recording a serial
episode more than once when
it is shown several times a
day, a tolerance time must be
entered.
The serial is then only
recorded when it starts
within the start time ± serial
recording tolerance. Enter the
time with
0 - 9
on the remote
control (always enter two
digits for 01 to 60 minutes).
± 30 min
Record subtitles
If DVB or teletext subtitles
are to be recorded with DVB
programmes, select the
priority for subtitles to be
recorded here.
no
Setting pre-record time and post record time
You can set a pre-record and post record time for timer
recordings made without VPS. This reduces the risk of
parts of the programme not being recorded because it
starts earlier and/or finishes later.
NOTE
• Note that this operation is performed via the TV menu, not
via the Digital Recorder menu.
In the TV mode, press
MENU
to display the TV
menu.
Select “Recording” with
c
/
d
and press
b
to
move down.
Recording
TV menu
Recording wizard
Timer list
Pre-record time
Post-record time
00 min
05 min
Setup
Εxtended function
Connections
Select “Pre-record time” or “Post-record time”
with
a
/
b
.
Enter the time with
0 - 9
on the remote control
(always enter two digits for 01 to 15 minutes
for the pre-record time, and for the Post-record
time 00 to 60 minutes).
1
2
3
4
44
LC-52HD1E-gb.indd 44
LC-52HD1E-gb.indd 44
2008/03/24 15:01:32
2008/03/24 15:01:32
Downloaded From TV-Manual.com Manuals
