LC-32XL8E/S/RU, LC-37XL8E/S/RU
3 – 10
Example of option: “NORMAL”
“TVD(014TV)”, “INPUT1”, “INPUT2”, “INPUT3”, “NPUT8”, “HDMI”, “HDMI2”, “HDMI3”, “PC”
12)Input fixed [INPUT MODE FIXED]
13)Speaker ON/OFF selection [LOUD SPEAKER]
14)Remote control path through [RC PATH THROUGH]
15)232C power ON control [232C POWON]
16)Hotel mode setting [HOTELEMODE]
Remarks
• When set other than “NORMAL”,
Display of the channel setting menu and channel setting operation are prohibited.
• When set to “NORMAL”, “START MODE FIXED” is set to “VARIABLE” and selection is prohibited.
Option
“VARIABLE”, “FIXED”, “AC CTRL” or “AC/RC CTRL” (loop enabled)
Default
VARIABLE
Function
When set to “FIXED”, switching to another channel or input is impossible after start-up in the set value of “INPUT
MODE START”.
When set to “AC CTRL”, the unit starts in the set value of “INPUT MODE START” in the case of the ACON only.
When set to “AC/RC CTRL”, the unit starts in the set value of “INPUT MODE START”.
Key disabled when set
to”FIXED” (example)
CHANNEL
, DIRECT CHANNEL buttons, FLASHBACK, INPUT SELECT, TV/VIDEO, AUTO PRESET,
MANUAL MEMORY, i.LINK, DIRECT INPUT SELECT, ATV, DTV, EPG, RADIO
Remarks
• If the “START MODE” setting is “NORMAL”, this item cannot be set.
Set to “VARIABLE”.
• When set to “FIXED”
The channel setting menu and input selection menu in the menu are not displayed.
Option
“ON” or “OFF”(loop enabled)
Default
ON
Function
The sound from the speakers is not output even if the headphones are not used.
Remarks
• When the VOLUME UP/DOWN key is pressed, the mute icon is displayed for 4 seconds.
• For the MUTE key and sound-related keys, caution is displayed.
• For the headphones and monitor output sound, normal operation is possible.
Option
“OFF”, “ON:TV RCE” or “ON:TV RCD” (loop enabled)
Default
OFF
Function
The signal received by the remote control’s light-receiving section is output to the blank pin (9pin) of RS232C.
Exception
• Even in the case of “ON:TV RCD”, the PROCESS MODE, INSPECTION MODE and HOTEL MODE keys are
enabled.
• Even in the case of “ON:TV RCD”, all the keys are enabled while entering the PROCESS MODE, INSPECTION
MODE and HOTEL MODE.
Remarks
• The model always outputting and that impossible to output exist due to the structure of the hardware.
Option
“ENABLE” or “DISABLE” (loop enabled)
Default
DISABLE
Function
Power ON by the 232C command is enabled/disabled in the standby state.
The same function as 232C command “RSPW”.
“ENABLE”: POWR0001 is always enabled.
“DISABLE”: Start-up may be impossible at POWR0001.
(If the 232C command reception module is set to OFF, the command is invalid.)
Option
“OFF” or “ON” (loop enabled)
Default
OFF
Function
The items set in the hotel mode setting menu are enabled or disabled.
The same item as [HOTELEMODE] in the adjustment process menu.
Remarks
• Each operation of the hotel mode is impossible unless this item is set to ON.
