LC-32XL8E/S/RU, LC-37XL8E/S/RU
3 – 8
* The OSD display is an example.
If another ODS is previously displayed, the status is reset (MENU or similar).
2) Instantaneous current shutdown setting when turning off the power [SHUT DOWN MODE]
3) Volume maximum level [MAXIMUM VOLUME]
4) Volume fixed [VOLUME FIXED]
5) Volume fixed level [VOLUME FIXED LEVEL]
6) Remote control operation [RC BUTTON]
Option
“NORMAL” or “QUICK”
Default
NORMAL
Function
• Scanning or recording of the digital tuner is enabled/disabled when turning off the power. It is possible to put into
the standby state instantaneously due to power off input.
Remarks
When selecting “QUICK”, the function does not work for the following items (The possible method differs from model
to model: deleting the item, selection impossible, etc.)
• ON TIMER, QUICK START, DIGITAL FIXED, etc.
Option
0 ~ 60 (loop disabled)
Default
60
Function
The volume cannot be increased more than the adjusted value (the main unit’s speaker only).
Exception
• In the adjustment process, the volume can be set as desired regardless of this setting.
Remarks
• When set to 59 or less, only the figure is displayed in the normal mode; the volume bar is not displayed.
• The volume of the headphones or monitor output is limited.
• The setting is impossible when VOLUME FIXED is set other than VARIABLE.
Option
“VARIABLE”, “FIXED”, “AC CTRL” or “AC/RC CTRL” (loop enabled)
Default
“VARIABLE”
Function
• FIXED: The volume is fixed to the value adjusted in the volume fixed level.
• AC CTRL: In the case of ACON, the unit starts at the volume specified in the volume fixed level.
• AC/RC CTRL: The unit starts at the volume specified in the volume fixed level.
Exception
• In the adjustment process, the volume can be set to any level regardless of this setting.
Key disabled when set
to FIXED
• VOLUME UP/DOWN (VOL+/-) [both remote control and main unit]
• MUTE (MUTE)
* The main unit’s keys for the menu operation are enabled.
Remarks
• VOLUME FIXED has priority over MAXIMUM VOLUME.
• The volume of the headphones or monitor output is fixed.
• The volume is not displayed when operating the above disabled keys.
• VOLUME can be abbreviated to VOL.
Option
0 ~ 60 (loop disabled)
Default
20
Function
The volume is fixed to the adjusted value (the main unit’s speaker only).
Exception
• In the adjustment process, the volume can be set to any level regardless of this setting.
Remarks
• When setting VOLUME FIXED to “VARIABLE”, the setting cannot be changed.
• VOLUME can be abbreviated to VOL.
Option
“RESPOND”, “NO RESPOND” or “LIMITED” (loop enabled)
Default
RESPOND
Function
The operation of the remote control’s keys is set.
• When set to “NO RESPOND”, the remote control’s keys in the normal state are disabled.
The POWER key (RECEPTION/STANDBY key) is also disabled.
• When set to “LIMITED”, only a part of keys (CHANNEL, etc.) is enabled and other keys are disabled. (POWER,
VOLUME
, CHANNEL
, LIGHT CONTROL (BRIGHTNESS SENSOR), BROADCAST SELECT)
Exception
• The PROCESS MODE, INSPECTION MODE and HOTEL MODE keys are enabled regardless of this setting.
• All the keys are enabled regardless of this setting while entering the process mode, inspection mode or hotel
mode.
Remarks
The keys enabled when set to “LIMITED” correspond to those on the remote control for hotel; they differ from model
to model.
