Sharp LC-32SV502B, Service Manual

Page: 7 / 140

LC-32SV502B/LC-42SV502B/LC-42SV602B/LC-46SV602B/LC-46SV502L
7
[2] OPERATION MANUAL
Remote Control (LC-46SV502L)
NOTE
• When using the remote control unit, point it at the TV.
1 POWER: Switch the power on or enter standby mode.
2 0–9: Set the channel.
3 • (DOT)
4 DISPLAY: Display the current channel (or input source)
information on the screen.
5 FREEZE: Set the still image. Press again to return to
normal screen.
6 VOL +/-: Set the volume.
7 MUTE: Mute the sound.
8 TV: Switch to TV input source.
9 USB: Switch to USB input source.
10 ENTER: Select a desired item on the
screen.
11 EXIT: Turn off the menu screen.
12 FAVORITE CH: A, B, C, D: Select 4 preset favorite
channels in 4 different categories. While watching, you
can toggle the selected channels by pressing A, B, C and
D.
13 SLEEP: Allows you to set a time when the TV
automatically switches to standby. This display will
disappear after few seconds, and the sleep timer starts to
count down automatically.
• If you want to adjust the sleep timer again, you can press
this button repeatedly then change the time setting.
• The TV will enter into the standby mode when the
remaining time reaches zero.
14 CC: Display captions during closed-caption source.
15
16 INPUT: Select a TV input source.
17 ENT: Jumps to a channel after selecting with the 0–9
buttons.
18 FLASHBACK: Press to switch to the previously tuned
channel. Press again to switch back to the currently tuned
channel.
19 AUDIO: Display the MTS/SAP setting menu.
20 CH : Select the channel.
21 SURROUND: Display the surround setting menu.
22 MENU: Display the menu screen.
23 PC: Switch to PC input source.
24 RETURN: Return to the previous menu screen.
25 AV MODE: Select an adjusted picture settings.
( Standard , Movie , Power Saver , User , Dynamic )
26 VIEW MODE: Select the Picture Mode.