Sharp LC-32SV502B, Service Manual

Page: 12 / 140

LC-32SV502B/LC-42SV502B/LC-42SV602B/LC-46SV602B/LC-46SV502L
12
Detaching the Stand Neck for Wall Mounting
Caution
• Please use with care while disassembling the cabinet, stand, and pillar for wall mounting.
• Detach the stand neck in the correct direction.
• Do not remove the stand neck from the TV unless mounting it with an optional wall mount
Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver. Remove the stand cover from the TV set.
Note
• To attach the stand neck, perform the steps in reverse order.
• Do not overtighten the screws and install the TV set without the stand cover.
Wall Mounting
TV screen size (Inches)
VESA-compatible wall bracket
(millimeters) (W x H)
Screw type
LC-46SV502L 400 x 400 mm Metric 6 x 14 mm
LC-46SV602B 400 x 400 mm Metric 6 x 16 mm
LC-42SV602B
LC-42SV502B
400 x 400 mm Metric 6 x 16 mm
LC-32SV502B 200 x 100 mm Metric 4 x 14 mm
Note
• At the time of purchasing wall bracket, please check if there is enough space between the wall bracket and TV terminals for the terminal connection
Preparation
Installing Batteries in the Remote Control Unit
1 Remove the battery compartment from the remote control.
2 Insert two "AAA" size batteries (supplied with the product).
LC-46SV502L
• Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment.