Turning On/Off the Power
EZ Setup
Watching TV
Press
POWER
on the TV, or
POWER
on the remote control
unit to turn the power on.
• POWER indicator: Power on, Green; Power off, red.
Press
POWER
on the TV, or
POWER
on the remote control
unit again to turn the power off.
• The TV enters standby and the image on the screen
disappears.
• If you are not going to use this TV for a long period of time, be sure to
remove the AC cord from the AC outlet.
• Small amount of electric power is still consumed even when the TV is
turned off.
• If there is no signal input for 15 minutes, the power will turn to standby
mode automatically.
INPUT
3
1
2
POWER
When you turn on the TV for the first time, the
EZ Setup will guide you through the setup
process. Perform the following steps before
you press
POWER
on the remote control unit.
1.
Insert the batteries into the remote control
unit. (See page 11.)
2.
Connect the antenna cable to the TV. (See
page 10.)
3.
Plug in the AC cord to the AC outlet. (See
page 8.)
1. EZ Setup
•
The EZ Setup screen display at the first
use. Press
ENTER
to start the EZ setup.
2. Language setting
TV
USB
PC
MENU
N
R
U
T
E
R
T
I
X
E
ENTER
Thank You for Your Purchase of our SHARP Liquid Crystal Television.
Please press [ENTER] to start the Wizard.
TV
EZ Setup
Welcome
Enter
Enter
TV Location
Select "Home" or "Store" for the location where
you plan to install the TV. This product qualifi es
for ENERGY STAR in Home mode default
setting.
3. Location setting
• Press / to select “Home” or “Store”
and press to the next step.
• Select the OSD menu language from
English, Spanish, or French.
• Press / to select the desired
language listed on the screen, and then
press the button to the next step.
Language
TV
EZ Setup
Set the on-screen display language
English
Français
Español
Select
Enter
Back
Exit
Enter
Return
EXIT
Language
TV
EZ Setup
Select where the TV will be placed.
The picture will be optimized for
that location.
Home
Store
Select
Enter
Back
Exit
Enter
Return
EXIT
TV Location
POWER
20
