6
Preparation
•
When installing the stand, you need to put your TV on a flat surface. Before that, put a soft
cushion on the surface.
•
Before attaching (or detaching) the stand, unplug the AC power cord from the AC power outlet.
•
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
•
Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
2
Attaching the stand unit
NOTE
• To detach the stand unit, perform the steps in reverse order.
• The angle of the stand is not adjustable.
• A screwdriver is not supplied with this product.
• During installation, please be careful to avoid getting your
hand trapped between the TV bottom and the floor.
1
Confirm that there are screws with the stand unit.
( Four screws)
(Will be used in step 2)
1
Insert the base into the openings on the bottom of the TV(while holding the base to avoid it from falling
over).
2
Insert the four screws into the four holes on the bottom of the TV, and tighten them.
2
1
Soft cushion
Screwdriver
Screws
M3H_EN_160126.indd 6
2016/1/27 22:58:42
