2.4: SPRING SHUTTER/PLATE RETAINER/
RETAINER SHUTTER/COVER CLAMPER/
PLATE CLAMPER/MAGNET CLAMPER/
CLAMPER/GUIDE DISC/LEVER DISC/
SPRING LEVER GUIDE/SPRING LEVER DISC/
LEVER DISC (Refer to Fig. 2-4-A)
1.
Unlock the support (1).
2.
Remove the Retainer Shutter Ass'y.
3.
Remove the Spring Shutter.
4.
Remove the 3 screws (2).
5.
Remove the Plate Retainer.
6.
Remove the Retainer Shutter.
7.
Unlock the 2 supports (3).
8.
Remove the Cover Clamper.
9.
Unlock the 3 supports (4).
10. Remove the Plate Clamper.
(OK) (NG)
11. Remove the Magnet Clamper.
12. Remove the Clamper.
13. Unlock the support (5).
14. Remove the Guide Disc.
15. Remove the Lever Guide.
16. Remove the Spring Lever Guide.
17. Remove the Spring Lever Disc.
18. Remove the Lever Disc.
DISASSEMBLY INSTRUCTIONS
Spring Shutter (2pcs)
Clamper Ass'y
Fig. 2-4-B
Check Hook
Frame Main Ass'y
Retainer Shutter
B2-4
2-5: FFC WIRE HANDLING
1. When installing the FFC, fold it correctly and install it as
shown from Fig. 2-5-A to Fig. 2-5-D.
NOTE
1. Do not make the folding lines except the specified
positions for the FFC.
• Screw Torque: 0.7 ± 0.3kgf•cm (Screw (2))
NOTE
35 ± 1mm
1.
In case of the Retainer Shutter Ass'y installation,
check if the value of the Fig. 2-4-B is correct.
Fold
2.
In case of the Clamper Ass'y installation,
check if the value of the Fig. 2-4-C is correct.
[ 22 pin FFC ]
Guide Disc
Frame Mian
Spring Lever Disc
(5)
(2)
Lever Disc
Lever Guide
Spring Lever Guide
Cover Clamper
Plate Clamper
Magnet Clamper
Clamper
(2)
(2)
Retainer Shutter
Spring Shutter
Fig. 2-4-A
Fig. 2-4-C
Fig. 2-5-A
Printing Surface
Plate Retainer
(1)
(3)
(4)
Check Hook
B2-4
