LC-24LE170I
6 – 1
CHAPTER 6.
ADJUSTMENT
[1] ADJUSTMENT
3. Software upgrading.
1) Plug o the LCD TV.
2) Insert the USB device to the USB terminal at the LCD
TV.
(Make sure that the latest software is installed in the USB device).
3) Hold the LCD TV power key and plug on the LCD TV.
4) LCD TV is on and detecting the USB
device.
5) A few seconds later, L ED l i g h t ( o r a n ge ) w i l l b l i n k i n d i c at i n g the software upgrading.
7) TV will automatically restart when software is successfully installed
8) LCD TV is running with the latest software.
[1] ADJUSTMENT PROCEDURE
1. Entering and cancel the adjustment processmode
1) While holding down the POWER and CENTER keys at the same time, plug in the AC CORD to turn the power
Backlight turned ON, screen display show Black pattern and LED blinking GREEN --> RED --> GREEN --> RED.
2)
Enter password “UP (CH UP) --> DOWN (CH DOWN) --> UP (CH UP)”. (After 30 sec password not keyed in or password keyed in wrong, go to previous
Power Status (On, Standby or OFF).
3)
2. Remote controller key operation and description of display in adjustment processmode.
Remotecontroller key
Main unit key
Function
CH (
/
)
Changing selecting ine (UP/DOWN)
VOL(+ / –)
Cursor ( / )
——————
e
g
a
p
a
g
n
i
n
r
u
T
(PREVIOUS/NEXT)
Cursor ( / )
Changing a selected line setting (+10/-10)
INPUT button on remote
controller
CENTER
e
l
g
g
o
t(
g
n
i
h
c
ti
w
s
e
c
r
u
o
s
t
u
p
n
I
switching)
(TV INPUT1
INPUT2 )
R
E
T
N
E
* Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
Backlight turned ON, screen display show Purple test pattern (LED still blinking GREEN --> RED --> GREEN --> RED)
4)
Press the Center Key (The adjustment process mode screen appears).
5)
——————
——————
UP/DOWN
LEFT/RIGHT
Changing selecting line setting (+1/-1)
Enter
