SERVICE MANUAL
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRE-
CAUTION............................................................i
PRECAUTIONS FOR USING LEAD-FREE
SOLDER ............................................................ii
CHAPTER 1. OUTLINE
[1] OUTLINE ...................................................... 1-1
........ 7-1
........ 8-1
........ 9-1
........ 9-5
........ 9-7
CHAPTER 2. SPECIFICATIONS
[1] SPECIFICATION .......................................... 2-1
CHAPTER 3. OPERATION MANUAL
[1] OPERATION MANUAL ................................ 3-1
CHAPTER 4. DIMENSIONS
[1] DIMENSIONS .............................................. 4-1
CHAPTER 5. REMOVING MAJOR PARTS
[1] REMOVING OF MAJOR PARTS ................
........ 5-1
CHAPTER 6. ADJUSTMENT
[1] ADJUSTMENT ............................................. 6-1
CHAPTER 7. TROUBLE SHOOTING TABLE
[1] TROUBLE SHOOTING TABLE.............
CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK
DIAGRAM
[1] SYSTEM BLOCK DIAGRAM................
CHAPTER 9. PRINTED WIRING BOARD
ASSEMBLIES
[1] MAIN UNIT............................................
[2] LED RC UNIT.......................................
[3] POWER UNIT.......................................
..... 10-1
..... 10-4
...... 10-2
...... 10-6
CHAPTER 10. SCHEMATIC DIAGRAM
[1] DESCRIPTION OF SCHEMATIC
DIAGRAM..............................................
[2] MAIN UNIT ...........................................
[3] LED RC UNIT .......................................
[4] POWER UNIT ......................................
Parts Guide
TopPage
LC-24LE170I
CONTENTS
LED BACKLIGHT TV
LC-24LE170I
MODEL
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
