![background image](http://html.mh-extra.com/html/sharp/lc-22dv200e/lc-22dv200e_operation-manual_373838015.webp)
TV menu
E
Step 2: Select your country
Select the country where you are located. The TV
installs and arranges channels according to your
country.
Press
1.
TV MENU
on the remote control and
select
≥
Country
.
Press
2.
/
or to select your country.
Follow the on-screen instructions to exit.
3.
E
Step 3: Automatic installation
Your TV searches and stores all available digital and
analogue TV channels as well as all available digital
radio channels.
Press
1.
TV MENU
on the remote control and
select
≥
Channel Set Up
.
Then press
OK
or
.
NOTE
You are prompted to enter current password to enter
•
Channel Set Up
if
Channel Block
in the
Parental
menu is not the default setting.
Select
2.
Auto Scan
≥
Start
and press
OK
or
to start channel installation. The installation
may take a few minutes.
When complete, follow the on-screen
3.
instructions to exit.
Update Scan
Update Scan
has similar function with
Auto Scan
.
The difference is you could update channel list without
erasing the original information.
Press
1.
TV MENU
on the remote control and
select
≥
Channel Set Up
. Then press
OK
or
.
NOTE
You are prompted to enter current password to enter
•
Channel Set Up
if
Channel Block
in the
Parental
menu is not the default setting.
Press
2.
/
to select
Update Scan
≥
Start
and press
OK
or
to start channel update.
When complete, follow the on-screen
3.
instructions to exit.
Single RF Scan
If using digital broadcasts, you can check the quality
and signal strength of digital channels. This allows you
to reposition and test your antenna or satellite dish.
Press
1.
TV MENU
on the remote control and
select
≥
Channel Set Up
.
Then press
OK
or
.
NOTE
You are prompted to enter current password to enter
•
Channel Set Up
if
Channel Block
in the
Parental
menu is not the default setting.
Press
2.
/
to select
Signal Status
and press
OK
or
to enter.
Picture
Option
Lock
Signal Strength
Signal Quality
Good
100
When the scan is completed, the result of
3.
Signal Strength and Signal Quality appear on
the screen.
Follow the on-screen instructions to exit.
4.
NOTE
If the signal quality and strength is poor, reposition
•
the antenna or satellite dish and retest.
If you have further problems with the reception of
•
your digital broadcast, contact a specialised installer.
Channel Skip
Channel skip allows you to skip one or more channels
when pressing
P
<>
on the remote control to switch
between channels.
Press
1.
TV MENU
on the remote control and
select
≥
Channel Set Up
.
Then press
OK
or
.
NOTE
You are prompted to enter current password to enter
•
Channel Set Up
if
Channel Block
in the
Parental
menu is not the default setting.
Press
2.
/
to select
Channel Skip
and press
OK
or
to enter the channel list.
Press
3.
/
to select one or more channels you
preferred to skip.
Press
4.
OK
to mark or cancel.
Follow the on-screen instructions to exit.
5.
NOTE
To watch the skipped channels, enter the channel
•
numbers by using the
digit buttons
on the remote
control or select from channel list.
If you perform Auto Scan, your stored settings will be
•
erased and you will have to perform this operation again.
15
54B0101A_English.indd 15
54B0101A_English.indd 15
2/27/2010 17:23:26
2/27/2010 17:23:26