Sharp LC-20AX7X, Operation Manual

Page: 28 / 39

26
To let you enjoy A2 stereo broadcasting, this LCD TV set
receives A2 stereo system and bilingual broadcasts.
Stereo
The LCD TV set is receiving a stereo broadcast.
• Each time you press
MPX , the mode changes between
“STEREO” and “MONO”.
• When “MONO” is selected, the TV sound is output
monaurally.
(When stereo sound is received)
49
STEREO
49
MONO
Bilingual
The LCD TV set is receiving a bilingual broadcast.
• Pressing
MPX changes the audio mode in the order
shown below.
• MAIN=main sound or SUB=sub sound, can be selected.
(When main sound is received) (When sub sound is received)
49
MAIN
49
SUB
A
• The setting can be selected individually for each channel
number.
If the sound quality is poor due to a weak signal or other
problems during A2 stereo broadcast reception, set the “OFF”
position of the A2 to change the TV sound to monaural.
Press MENU to display the Menu screen.
Press
\
/
|
to select “SETUP”.
Press
'
/
"
to select “CH SETUP”, and press ENTER .
Press
'
/
"
to select “MANUAL”, and press ENTER .
Press
'
/
"
to select “A2”, and press
\
/
|
to select
“OFF”.
3 2 6 , 7 , 2 1 & + 3 2 6 , 7 , 2 1 & +
& 2 / 2 8 5 6 < 6 7 ( 0 $ 8 7 2
& 2 / 2 8 5 6 < 6 7 ( 0 $ 8 7 2
6 2 8 1 ' 6 < 6 7 ( 0 % *
6 2 8 1 ' 6 < 6 7 ( 0 % *
6 . , 3 2 ) )
6 . , 3 2 ) )
) , 1 ( 0 + ]
) , 1 ( 0 + ]
1 , & $ 0 2 1
1 , & $ 0 2 1
$ $ 2 ) ) 2 ) )
• When the A2 sound is set to the “OFF” position, the TV
sound is output in monaural.
(When the “OFF” position is selected)
Press MENU to exit.
A
• When the A2 sound is set to the “OFF” position, MPX cannot be
used to change the audio mode (stereo and bilingual settings).
6
A2 Stereo Broadcast Selection
1
2
4
5
“
b
” is displayed when A2 is
set to “OFF” during A2 stereo
broadcast.
3
LC-20AX7X̲E.indb 26 LC-20AX7X̲E.indb 26 2006/10/11 15:55:44 2006/10/11 15:55:44