Sharp LC-20A2E Operation Manual Download

Page: 53 / 58

Troubleshooting

Before calling for repair services, make the following checks for possible remedies to the symptoms
encountered.

LCD TV set

Problem

Check item

• Make sure the AC adapter is properly inserted in the

power outlet.

• Reception other than that of broadcasting stations can

be considered.

• Make sure the input mode is set to TV.
• Make sure the main power switch of the main unit is on.

• Make sure Picture adjustment is properly adjusted.
• The fluorescent lamp may have reached the end of its

service life.

• Make sure the S-Video terminal has nothing connected.

• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure the headphones are not connected.

• Make sure the antenna cable is properly connected.
• Bad reception should be considered.

• Make sure the antenna cable is properly connected.
• Bad reception can be considered.

• Check the colour adjustment.

(NTSC mode)

• Check if “Brightness” is set to “dark.”
• Check “Contrast” and “Black level.”
• The fluorescent lamp may have reached the end of its

service life.

• Check if batteries in the remote control have sufficient

power.

• Make sure the remote sensor window is not under

strong lighting.

Reference

page

13
13

–

14
14
11

6
–

16
16

–

Sound

Picture

There is no
picture or sound.

There is no
picture.
There is no
picture from AV-
IN2.

There is no
sound.

Picture is not
clear.

Picture is too
light or
improperly
tinted.

The picture is
too dark.

Remote control does not work.

There is no
picture or sound,
just noise.

LC-20A2E-GBpp40-56

00.12.12, 1:08 PM

Summary of Contents for LC-20A2E



























































Search results

Summary of Contents for LC-20A2E

Reviews:

Related manuals for LC-20A2E

Brands by name

Popular brands

Sharp LC-20A2E, Operation Manual

Search results

Summary of Contents for LC-20A2E

Reviews:

Related manuals for LC-20A2E

Brands by name

Popular brands