Sharp LC-19SB15U, LC-19SB25U, LC-19SB25U-W Operation Manual Download Page 13 | Manualshive

Page: 13 / 55

background image

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the TV set.

1. A 75-ohm system is generally a round cable with F-type

connector that can easily be attached to a terminal
without tools (Commercially available).

F-type connector

300-ohm twin-lead cable (fl at)

F-type connector

75-ohm coaxial cable (round)

75-ohm coaxial cable

NOTICE

2. A 300-ohm system is a fl at “twin-lead” cable that can be

attached to a 75-ohm terminal through a 300/75-ohm
adapter (Commercially available).

F-type connector should be fi nger-
tightened only.

When connecting the RF cable to the TV set, do not
tighten F-type connector with tools.
If tools are used, it may cause damage to your TV
set. (The breaking of internal circuit, etc.)

13

Preparation

Using the remote control unit

Use the remote control unit by pointing it towards the remote control sensor on the
TV. Objects between the remote control unit and the remote control sensor may
prevent proper operation.

Cautions regarding the remote control unit

• Do not expose the remote control unit to shock. In addition, do not expose the remote

control unit to liquids, and do not place in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight. The heat may cause

deformation of the remote control unit.

• The remote control unit may not work properly if the remote control sensor on the TV is

under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV, or operate the remote control unit closer to the remote control sensor.

Connecting Antenna Cable

1

Cable without a CATV

converter

3

Combination VHF/

UHF antenna

4

Separate VHF/UHF

antenna

To TV antenna
terminal

2

VHF/UHF antenna

•

Connect the antenna cable
to the TV using one of the
methods in the illustration
as shown (

1

,

2

,

3

or

4

).

This manual downloaded from http://www.manualowl.com

«
...
11
12
13
14
15
...
»

Summary of Contents for LC-19SB15U, LC-19SB25U, LC-19SB25U-W
























































Reviews:

No comments

Related manuals for LC-19SB15U, LC-19SB25U, LC-19SB25U-W

Brand: Samsung Pages: 2

Brand: Samsung Pages: 20

Brand: Samsung Pages: 54

Brand: Samsung Pages: 52

SyncMaster P2370HD

Brand: Samsung Pages: 2

Brand: Samsung Pages: 10

Brand: Samsung Pages: 46

UN32B6000 - 32" LCD TV

Brand: Samsung Pages: 74

UN55B6000 - 55" LCD TV

Brand: Samsung Pages: 89

Brand: Samsung Pages: 50

SyncMaster P2370HD

Brand: Samsung Pages: 64

Brand: Grundig Pages: 44

Brand: Sceptre Pages: 71

SENTRY 2 SAR2035Y7

Brand: Zenith Pages: 24

Brand: Durabase Pages: 116

Brand: I-Inc Pages: 22

Brand: Hisense Pages: 6

Brand: Hisense Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands