25
Watching TV
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
1
2
Sleep timer: Remain 2 hr. 00 min.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing
SLEEP
to cancel the sleep timer.
Press
SLEEP
.
• Remaining time displays when sleep timer has
been set.
Each time you press
SLEEP
, the remaining
time switches as shown below.
0 hr. 30 min.
1 hr. 00 min.
1 hr. 30 min.
2 hr. 30 min.
2 hr. 00 min.
Off
Press
MENU
and the MENU screen displays.
1
Press
c
/
d
to select “Power Control”, and
then press
ENTER
.
• Power control menu displays.
2
Press
a
/
b
to select “No Signal Off”, and then
press
ENTER
.
3
Press
a
/
b
to select “Enable”, and then press
ENTER
.
• Five minutes before the power shuts down, the
remaining time displays every minute.
4
Press
MENU
and the MENU screen displays.
1
Press
c
/
d
to select “Power Control”, and
then press
ENTER
.
• Power control menu displays.
2
Press
a
/
b
to select “No Operation Off”, and
then press
ENTER
.
3
Press
a
/
b
to select “30 minutes” or “3 hour”,
and then press
ENTER
.
• Five minutes before the power shuts down, the
remaining time displays every minute.
4
NOTE
• “Disable” is the factory preset value.
Auto power-off when there are no
operations performed
You can set the TV to automatically power off when no
TV operation is performed for more than 30 minutes or
3 hours.
NOTE
• “Disable” is the factory preset value.
• When a TV programme fi nishes, and the TV receives signal
input, this function may not operate.
Auto power-off after the end of broadcast
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals, such as the end of a broadcast
day.
Energy conservation settings
19A33X_en_d.indd 25
19A33X_en_d.indd 25
2007/07/23 18:23:37
2007/07/23 18:23:37
