Sharp KI-L80, Operation Manual

Page: 19 / 84

EN-17
ENGLISH
PLASMACLUSTER ION
GENERATING UNIT
UNIT REPLA & EMENT LAMP
When the total operation time exceeds 17,500
hours, the Unit Replacement Lamp will flash to
indicate that the Plasmacluster Ion Generating Unit
needs replacement.
Operating time
17,500 hours
Flash slowly
Replace the Plasmacluster Ion
Generating Unit
19,000 hours
)ODVKTXLFNO\
No Plasmacluster ions will be
released by the Plasmacluster
Ion Generating Unit.
* The replacement time is not related to the selected
operation mode.
Replacement Plasmacluster Ion
* enerating Unit Model
Consult your dealer when purchasing a replacement
Plasmacluster Ion Generating Unit.
IZ- & 90ME
Attach the New Unit.
Disposing o I Plasmacluster Ion
* enerating Unit
Dispose of used Plasmacluster Ion Generating Unit
according to local laws and regulations.
material:
• Polybutylene Terephthalate
• electronic parts
Remove the claw of Unit Holder (
1
), and remove the
Plasmacluster Ion Generating Unit (
2
).
TROUBLESHOOTING
Odor and smoke persists.
• Check the filters. If they appear to be extremely
dirty, clean or replace them.
Air discharged from the product
has an odor.
• Check to see if the filters are extremely dirty.
• Clean or replace the filters.
• Use only fresh tap water. Using other water
sources risks the growth of mold, fungi, or
bacteria.
The product does not operate
when cigarette smoke is in the air.
• Make sure the product is installed in a location in
which the sensors can detect cigarette smoke.
• Check to see if the Sensitive Dust Sensor
openings are blocked or clogged. If they are
blocked or clogged, clean the Sensor Filter or the
Back Panel.
Smell from a new product and/or
filter.
• Immediately after removing the plastic bag, a
slight odor may occur. This odor is not harmful for
filter performance or human exposure.
The product makes a clicking or
ticking sound.
• The product may make clicking or ticking sounds
when it is generating ions.
The Cleanliness Indicator is blue
or off even when the air is not
clean.
• The air may have been dirty when the product
was plugged in. Unplug the product, wait one
minute, and then plug the product in again.
The Cleanliness Indicator is red
even when the air is clean.
• Dirty or clogged Sensitive Dust Sensor openings
interfere with sensor operation. Gently clean the
Sensor Filter or the Back Panel.
Before calling for service, please review
the Troubleshooting list below, since
the problem may not be the product
malfunction.