EN-19
ENG
LI
SH
ERROR DISPLAY
If error occurs repeatedly, contact the Sharp
Service Centre.
• The concentration of Plasma-
cluster ion is descending.
Maintain the Plasmacluster
Ion Generating Unit (electrode
section).
• Is the Back Panel correctly in-
stalled?
• Make sure that the Humidify-
ing Filter, Humidifying Tray and
Roller are properly installed, and
then turn the power to ON again.
• Is the Pre-filter correctly in-
stalled?
• Is the Dust Box correctly in-
stalled?
• Is the Brush of the Dust Box
correctly installed?
• Is the the Plasmacluster Ion
Generating Unit inserted proper-
ly?
Pull out the the Plasmacluster
Ion Generating Unit and insert
it to the end again, and then
carry out the operation again.
• Unplug the Main Unit, wait one
minute, and then plug the Main
Unit in again.
The Pre-filter Auto Cleaning
function will not perform.
• Pre-filter Auto Cleaning function will not perform if
it has not been 48 hours since last Auto Cleaning
operation.
• Is it dark in the room?
The Pre-filter Auto Cleaning will not start if it is
dark in the room.
• Is the Main unit on Clean assist / Clean ion show-
er / Plasmacluster ion spot mode?
Pre-filter Auto Cleaning function will not perform
when the Main unit is on these mode.
• Is the air in the room dirty?
Pre-filter Auto Cleaning function will not perform
if the Cleanliness Monitor is not displaying the
colour of [Blue].
• Are there any buttons pressed?
If there is any button pressed, the Pre-filter Auto
Cleaning will not start until 10 minutes later.
KI-G75EU_10_languages_A.indb 19
2019-02-18 10:52:05
