Advantech WebAccess Device Driver Guide
Sharp JW 10 Serial
Version 6.0 rev 0
Advantech Corp., Ltd.
page 7
Figure 3.1 Serial Comport properties for Sharp JW – MMI Port, default settings (Memory
#236 or #226 = 00000000
3.2.1
Comport Number
The Serial Comport requires the comport number to match that of the
physical interface (e.g. COM1, COM2, COM3, etc) on the SCADA Node.
3.2.2
Description
This is an optional field used for user reference.
3.2.3
Baud Rate
For the Sharp JW10, values are from 300 to 38400 baud.
The default
setting is 19200
.
This must match the baud rate configured in the PLC.
Please refer to the
Manufacturer’s Documentation to determine the actual baud rate set in the
PLC.
All PLCs connected to this comport must use the same Baud Rate.
