![background image](http://html.mh-extra.com/html/sharp/jw10/jw10_driver-manual_367296011.webp)
Advantech WebAccess Device Driver Guide
Sharp JW 10 Serial
Version 6.0 rev 0
Advantech Corp., Ltd.
page 11
4.
Configure Tags
4.1
Analog Tag
This example is to configure a Tag that reads an Analog Input (Address
Register 900)
1. Open
Internet Explorer
.
2. Connect to
Project Node
.
3. Start
WebAccess Configuration
.
4. Select
Project
.
5. Select
SCADA Node
.
6. Select the Sharp JW10
Device
.
7. Select
Add Tag
.
8. From
Parameter
Pull Down List Select
Reg0
. This will configure an
Analog Input. Wait for the Page to update.
9. Optionally, select
ALARM
from the ALARM pulldown list. Wait for the
Page to update with a PINK highlight around alarm (an additional
Alarm Fields at bottom of page).
10. Enter a
Tagname
users can use to identify this Analog Input
measurement. For example, if this is a Flow measurement, enter
Reg0
.
11. Edit the
Address
to the actual address. From the example, Enter: