Advantech WebAccess Device Driver Guide
Sharp JW 10 Serial
Version 6.0 rev 0
Advantech Corp., Ltd.
page 12
09000
12. Enter a Description. This will help identify this tag to Users and
Operators. For example, enter Boiler #1 Steam Flow.
13. Optionally enter, Scaling, Span Hi, Span Low, Engineering Units, and
Alarms; enable data logging, etc.
14. Press
Submit
.
4.2
Digital Tag
This example is to configure a Tag that writes a Digital Output (Address DO
40)
15. Select the Sharp JW10
Device
.
16. Select
Add Tag
.
17. From
Parameter
Pull Down List Select
DO
. This will configure an
Analog Input. Wait for the Page to update.
18. Optionally, select
ALARM
from the ALARM pull down list. Wait for the
Page to update with a PINK highlight around alarm (an additional
Alarm Fields at bottom of page).
19. Enter a
Tagname
users can use to identify this Analog Input
measurement. For example, if this is a Flow measurement, enter
DO
.
20. Edit the
Address
to the actual address. From the example, Enter:
0040
21. Enter a Description. This will help identify this tag to Users and
Operators. For example, enter DO-Relay.
