AR-5316 MAINTENANCE 10-1
[10] MAINTENANCE
1. Maintenance table
X:Check(Clean, adjust, or replace when required.)
O:Clean
:Replace
:Adjust
:Lubricate
2. Maintenance display system
3. Note for replacement of consumable parts
A. TD cartridge
When a waste toner cartridge is removed from the machine, it must be
put in a polyethylene bag to avoid scattering of toner.
B. Drum cartridge
Do not shake or put up the developer cartridge. Otherwise developer
may scatter.
Unit name
Part name
When
calling
Optical
section
Lamp unit
Reflector
O
Mirror
O
No.2/3
mirror unit
Mirror
O
Pulley
X
CCD
peripheral
Lens
O
Glass
Table glass
O
White Plate
O
Other
Drive wire
X
Rail
X
Document cover
O
Document size sensor
O
LSU
Dust-proof glass
O
Paper feed
section
Multi paper
feed
section
Take-up roller
(manual / SPF)
O
Paper feed roller
O
Spring clutch
O
Paper
transport
section
PS roller
O
Transport (paper exit)
rollers
O
Spring clutch
O
Fusing
section
Upper heat roller
O
Pressure roller
O
Pressure roller bearing
X
Upper separation pawl
X
Lower separation pawl
X
Cleaning pad
X
Drive
section
Gears
X
Belts
X
Paper exit
section
Ozone filter
X
Toner
Life: 9K
LED
Near Empty: Illuminate
Empty : Blink
Machine
Near Empty: Active (about 300 page remains)
Empty: Stop
Drum
Life: 30K
LED&Machine
LED illuminate at 29K.
After the LED illuminates, if another 1K copies are
made the light will start blinking and the machine will
stop.
(Whether the machine will stop at 30K or not can be
selected by service simulation setting.)
Maintenance
LED
Illuminate at 150K. (for upper heat roller)
Not illuminating can be selected by service man
simulation setting.
Default: illuminate at 150K
Choice: 150K or Free(not illuminating)
Machine
Whether the machine will stop at 150K or not can be
selected by service simulation setting.
Default: Free (not stop)
Choice: stop at 150K or Free
[10]MAINTENANCE.fm 1 ページ ２００５年７月１日 金曜日 午後５時２９分
