Sharp IG-GC2EU, Operation Manual

Page: 105 / 115

E-5
Approx. 55°
Approx. 20°
INSTALLATION GUIDANCE
Connecting the car adapter and installing the unit
Car Adapter
Accessory
Socket
USB Plug
Insert the car adapter into the accessory socket and connect the USB plug
to the car adapter.
Note
• Be sure to remove any dirt
from the accessory socket.
Failure to do so could cause
faultily contact or fire.
• The car adapter has 2 USB ports, one of which the Plasmacluster Ion
Generator (IG-GC2EU) uses and another to connect equipment of 1.5 A
or lower.
• The car adapter (accessory) is for the Plasmacluster Ion Generator
“IG-GC2EU”.
It is possible to connect another equipment of 1.5 A or lower while the
Plasmacluster Ion Generator is connected. However, in this case, the
normal operation of the additional equipment is not guaranteed.
• The car adapter and / or connecting section could be hot while in use
and / or right after use.
Adjust the angle of louver and put the unit in the cup holder.
1
2