DVD
DVD
When you connect this unit to a DVD player which is playing
a disc with the trademark, you can enjoy realistic,
powerful sound by playing back the recorded signal through
6 speakers with the sound coming from the front left, front
right, center, surround left, surround right and sub woofer
speakers.
To listen to a disc using the Dolby Digital mode:
1
Connect a DVD player. (See page 8.)
2
Press the DVD button.
●
The current DVD input channel will be displayed. If the
DVD button is pressed while the current DVD channel is
displayed, the input channel (ANALOG, COAXIAL, OPTI-
CAL) can be changed.
3
Start the DVD player.
Note:
●
When the Dolby Digital surround mode is being used, the
equalizer will be set to FLAT.
Type of Dolby digital signal
There are different types of Dolby digital signals. When you select COAXIAL or OPTICAL for the DVD input channel, the
following items will be displayed for 2 seconds. They will also be displayed when the DVD player is operating and the DVD
button is pressed.
Display
Channels available
Display
Channels available
Normal PCM playback
Front (L, R) + surround
(L, R)
Center only (monaural)
Front (L, R) + center
Front (L, R)
(When the surround mode
is set to Normal, Phantom
or Wide sound will also be
heard from the surround
speakers.)
Front (L, R) +
surround (monaural)
Front (L, R) + surround
(monaural)
Front (L, R) +
surround (L, R)
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
DIGITAL
●
If a low frequency sound effect (Low Frequency Effect) contains a Dolby digital signal, "LFE" will light in the display.
When this "LFE" is lit, low frequency signals will be output from the sub woofer.
DOLBY DIGITAL
When Dolby digital signals are input, the display will light up
or go out, as shown to the left.
The channel speaker and SW indicators are used to set the
sound for listening in the surround mode and will light up
according to the speaker signals that are present.
➀
Lights up if the input contains a left channel signal.
➁
Lights up if the input contains a center channel signal.
➂
Lights up if the input contains a right channel signal.
➃
Lights up if the input contains an "LFE" signal.
➄
Lights up when the amplifier setting will output sound to
sub woofer.
➅
Lights up if the input contains a left surround signal.
➆
Lights up if the input contains surround signals.
➇
Lights up if the input contains a right surround signal.
➀
➁
➂
➃
➄
➅
➆
➇
HT-DD5000(SEC) TINSE0009SJZZ
13
