Sharp GZ200, User Manual

Page: 24 / 136

24 Call Functions
Note
• Conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step
2:
• To put all participants on hold, select “Conf. Hold
All”.
• To put all participants except the current call on
hold, select “Private”.
• To end the call with all participants, select
“Release All”.
• To disconnect from the conference call but still
allow the other participants to continue talking
together, select “Transfer”.
• To put the current call on hold and continue to
have a conference call with the remaining
participants, select “Exclude”.
• To reject adding more participants to the current
party, select “Reject”, or you can send the busy
tone by selecting “Busy”.
To Add New Participants to the Conference Call
1.
Press [Options] and select “Dial”.
2.
Enter the number you wish to include in the
conference call and press
D
to dial.
3.
Press [Options] and select “Multiparty”.
4.
Select “Conference All” to join the conference call.
If you wish to add other participants, repeat steps 1
to 4.
To End the Call with a Conference Call Participant
1.
During a conference call, highlight the person that
you wish to disconnect from the conference call.
2.
Press [Options] and select “Release Call”.