Sharp GZ200, User Manual

Page: 110 / 136

110 Settings
Tip
• You can save battery power by turning the Bluetooth
wireless function off whilst it is not in use. Turn the
Bluetooth wireless function off in “To Turn On or
Off” on page 109 or in “To Turn Off Automatically”.
• During a call, you can divert voice call to the paired
device. Press [Options] and select “Enable
Bluetooth”. If you wish to disconnect the paired
device, select “Disable Bluetooth”.
To Rename a Device
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Handsfree Devices”
1.
Highlight the device you wish to rename.
2.
Press [Options] and select “Change Name”.
3.
Rename the device.
To Clear a Device Name
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Handsfree Devices”
1.
Highlight the device you wish to clear.
2.
Press [Options] and select “Delete”.
Paired Devices
You can rename and delete the paired device in the list.
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent
other GZ200 phones from recognising your phone, turn
the
Bluetooth wireless function off automatically to
save battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in
other devices when your phone is detected.
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Device Name”
1.
Enter the new device name.
To Show or Hide Your Phone
“Settings”
→
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Visibility”
1.
Select the desired visibility settings.
“Show My Phone”: Allows other devices to
recognize your phone.
“Hide My Phone”: Hides your phone from other
devices.
Note
• In the initial connection of two devices, both devices
have to be identified by entering a passcode on a one
of basis. In order to ensure sufficient security, you
should choose a number combination for which is
difficult to guess (if possible consisting of 16 digits).