ENGLISH
REMOTE CONTROL
OPERATION
• To start operation, press the ON/OFF button.
A short beep will be heard and operation will start
from the AUTO mode.
• To stop operation, press the ON/OFF button again.
Operation stops with a long beep sound.
Transmitter
Manual (fan speed)
button
The fan speed can be
switched between Low,
Medium, High and Max.
Low operation button
Operation will be in the Low
mode with little discharged air.
*
Tobacco smoke re-
moval operation but-
ton
Unit will operate effectively
against smoking cigarettes,
etc.
ON/OFF button
Used to start AUTO operation
(short beep) and stop opera-
tion (long beep).
Filter reset button
Press this button after replac-
ing the filters.
AUTO (fan speed)
button
The fan speed switched auto-
matically depending on the
amount of pollution in the air.
Max operation button
Used to quickly clean the air in
the room.
Pollen removal opera-
tion button
The unit operates effectively
against pollen in the air.
OFF timer button
Used to set the OFF timer.
Every time this button is
pressed, the setting will be
switched as shown below.
1 hour
4 hours
8 hours
Cancel
• The remaining time is indi-
cated by the lamp as time
passes.
• The unit will stop operation
when the timer is up.
Cluster ion select button
AUTO cluster ion button
The unit will switch between the Clean mode and
Refresh mode automatically depending on the
air quality detected by the dust sensor.
Clean button
The unit will constantly operate in the Clean
mode. The Clean mode is effective for removing
mold fungus in the air.
(Cluster ion lamp lights up in(blue))
OFF button
The generation of ions is stopped and the
cluster ion lamp is turned off.
Refresh button
The unit will constantly operate in the Re-
fresh mode. The Refresh mode maintains
the balance of ions in the air for a refresh-
ing effect.
(Cluster ion lamp lights up in(green))
If the room smells especially moldy, operate the unit in the Clean mode.
• Manual fan speed opera-
tion
• AUTO fan speed operation
• Low operation
• Max operation
•
*
Tobacco smoke removal
operation
• Pollen removal operation
• OFF timer setting
• Cluster ion selection
AUTO cluster ion
Clean mode
Refresh mode
Operations available with
remote control
E-11
In the initial operation, the
Cluster ion mode is also set
as AUTO.
*
It can’t remove the noxious substances
(carbon monoxide etc.) of cigarette.
AIR PURIFIER
Plasmacluster
Filter reset button
It is dented not to push it by
mistake.
Press the filter reset button
with the point of the ball-point
pen and so on. A remote
controller is sometimes
damaged when it is pressed
with the point of a sharp
object.
