ENGLISH
2
Install the filter
1
Takeout the HEPA filter from the
plastic bag and install it into the
main unit with the
display facing upward.
Insert in the direction so that the tabs on
the HEPA filter are facing toward you.
Proper operation cannot be achieved if the
filter is installed on a wrong side.
HOW TO USE THE REMOTE CONTROL
Tabs
2
Takeout the stamina-power car-
bon from the plastic bag and in-
stall it in the main unit.
Make sure the tabs on the HEPA filter remain vis-
ible.
Stamina-power carbon
3
Install the pre-filter
Insert the 4 tabs of the pre-filter into the holes of
the main unit.
4
Fill in the usage start date on
the replacement label affixed on
the back of the front panel and
then mount the front panel.
The date is a refarence for filter replacement.
Back of front panel
Replacement label
• Operate the remote control by pointing fowards the main
unit (receiver).
• The maximum signal range is about 7m (front).
• Make sure no object obstruct the signal.
• When receiving signals the main unit will give a beep
sound.
Receiver
Transmitter
NOTE
• Avoid making strong impact on the remote control. In
addition, do not wet or place it under direct sunlight or
near a stove, etc. Malfunction may occur as a result.
E-9
HEPA filter
