Sharp FP-J60EU, Operation Manual

Page: 281 / 292

EN-7
EN
Use this mode when you want to remove adhering
odour, germs, and other substances from cloths,
sofas and curtains.
NOTE
• Emits highdensity Plasmacluster Ions only in the
forward direction.
• Discharges stronger air for 8 hours. When the
operation finishes, the main unit will return to its
prior operation mode.
• The Plasmacluster Ion can not be turned “OFF”.
♪
Adjust Front Louver manually.
The main unit releases Plasmacluster ions with
strong airflow and collects dusts while decreasing
static electricity for 10 minutes. After that, the DUST
sensor sensitivity is automatically increased and
quickly detects impurities and clean the air
powerfully for 50 minutes.
NOTE
•
When the operation finishes after 60 minutes, the
main unit will return to the prior operation mode.
It is able to change the other mode during this
mode.
• The Plasmacluster Ion can not be turned “OFF”.
♪
PLASMACLUSTER ION
SPOT MODE
START / STOP
AUTO MODE
CLEAN ION SHOWER
MODE
SELECTING MODE
SLEEP:
The main unit will operate quietly, and the fan speed
is automatically switched depending on the amount
of impurities in the air and room brightness.
The Front Display and Cleanliness Monitor
automatically switches darker or OFF based on
room brightness.
Room is bright: light is darker
Room is dark: light is OFF
POLLEN:
The DUST SENSOR sensitivity is automatically
increased and quickly detects impurities such as
dust and pollen and clean the air powerfully.
START STOP
OPERATION
The fan speed is automatically controlled
depending on the 3 detection.
(Dust (sensitive) / Odour / Light)
NOTE
• Front Display, Cleanliness Monitor automatically
switch ON and Darker based on room brightness.
(When light control is set to “Auto”. (page 9))
♪
♪
♪
♪
♪
♪♪
POLLEN
SLEEP
LOW
MED
MAX
♪♪♪
♪♪♪♪♪