Sharp FO-4500 Operation Manual Download Page 92

Page: 92 / 112

<P=006>

Setting 29: VERIFICATION STAMP

Press "

" if you want the fax machine to stamp each original document page as it is scanned.

After scanning, you can check to see if all pages have been stamped to verify that no double
feeds occurred. Press "

" to turn the function off.

Note:

This function will only operate if your dealer has installed the Verification Stamp option.

•

Initial setting:

Note:

The following settings will only appear if your dealer has installed the PC interface
option. If you do not have the Verification Stamp option, PC INTERFACE MODE will
appear as Setting 29 and RECEIVE UNIT will appear as Setting 30.

Setting 30:

PC INTERFACE MODE

Press "

" if you want to operate the fax from a personal computer, or "

" to disable computer

operation.

•

Initial setting:

Setting 31: RECEIVE UNIT

Press "

" to have incoming documents received in your personal computer. Press "

" to have

incoming documents received and printed out by your fax.

•

Initial setting:

OPTIONAL SETTINGS

5-6

OPTION SETTINGS

Summary of Contents for FO-4500

















































































































Search results

Summary of Contents for FO-4500

Reviews:

Related manuals for FO-4500

Brands by name

Popular brands

Sharp FO-4500, Operation Manual

Search results

Summary of Contents for FO-4500

Reviews:

Related manuals for FO-4500

Brands by name

Popular brands