<P=004>
Setting 16: CASSETTE SELECTION
Press "
1
" if you want the fax to automatically select the source from which it draws paper for
printing according to the size of the document received or copied. If you want to set an order of
priority among the sources for drawing paper, press the appropriate key as follows depending
on whether you have one or two cassettes.
One cassette:
"
2
":
Give priority to the cassette.
"
3
":
Give priority to the tray.
Two cassettes:
"
2
":
Upper cassette, lower cassette, tray.
"
3
":
Lower cassette, upper cassette, tray.
"
4
":
Tray, upper cassette, lower cassette.
"
5
":
Tray, lower cassette, upper cassette.
"
6
":
Lower cassette, tray, upper cassette.
"
7
":
Upper cassette, tray, lower cassette.
•
Initial setting:
1
Setting 17: CASSETTE CHANGEOVER
Press "
1
" to have the fax start drawing paper from another paper source if the currently used
source runs out of paper. Press "
2
" to stop changeover to another source (in this case, the
received document(s) will be stored in memory).
•
Initial setting:
1
Setting 18:
RETRANSMISSION TIMES
This sets the number of times the fax will reattempt a memory transmission which has been
interrupted by a line error or power failure. Enter any number from "
0
" to "
4
" ("
0
" disables the
function). In Eire, enter any number from "
0
" to "
3
".
•
Initial setting:
2
Setting 19:
RETRANSMISSION INTERVAL
You can select the number of minutes the fax waits between each memory retransmission
attempt. Enter "
01
" for 1 minute, "
02
" for 2 minutes, etc., up to a maximum of 15 minutes
(maximum of 5 minutes in Eire).
•
Initial setting:
05
Setting 20: HEATER MODE
To conserve electricity, you can turn off the laser printer heater in your fax. When this is done, it
will turn on automatically when you receive a document (there will be a slight delay before
printing while it warms up) and turn off once printing is completed. You can also set the heater
to automatically turn on during a certain time period of the day. Enter a number from "
1
" to "
3
"
as follows:
"
1
" (ALWAYS ON):
The heater will remain on constantly.
"
2
" (ALWAYS OFF):
The heater will turn on only to print documents.
"
3
" (SLEEP MODE TIMER): The heater will turn on and off at two selected times each
day. After you press "
3
", enter the time you want the heater
to turn on, and then the time you want it to turn off. For each
time, enter 2 digits for the hour ("00" to "23"), and 2 digits
for the minute.
•
Initial setting:
2
OPTIONAL SETTINGS
5-4
OPTION SETTINGS
