Sharp FO-4450, Service Manual

Page: 14 / 170

FO-4450U/FO-CS1
STORING AUTO DIAL NUMBERS
1. Press
MENU
, 3 , 0 , 1 .
2. Press 1 to store a number.
(Press 2 to clear a number.)
3. To store a Rapid Key number, press the desired Rapid Key.
To store a Speed Dial number, press
SPEED DIAL
and enter a number
from 1 to 75 (press
START/
ENTER
if you entered a 1-digit number).
(If clearing a number, select it as explained above and then perform
Step 7 and 9.)
4. Enter the full fax number.
5. Press
START/
ENTER
.
6. Enter a name by pressing the letter keys.
7. Press
START/
ENTER
.
8. Press 1 if this is a Chain Dial number.
Press 2 if this is a regular number.
9. Press
STOP
repeatedly to exit.
[6] Quick reference guide
SENDING FAXES
Place your document (up to 50 letter-size pages) face down in the docu-
ment feeder.
(Note: For Normal Dialing and Direct Keypad Dialing, you can also load
the document after dialing the number.)
Press
RESOLUTION
or
CONTRAST
if needed.
BROADCASTING
1. Load the document and press
BROADCAST
.
2. Dial destination numbers:
Press a Rapid Key.
Press a Group Key.
Press
SPEED DIAL
and enter a Speed Dial number (press
START/
ENTER
to com-
plete entry if only one digit is entered).
Enter a full number and press
START/
ENTER
.
3. When finished, press
START/
ENTER
.
4. Press
RESOLUTION
or
CONTRAST
if needed.
5. Press
START/
ENTER
.
Rapid Key Dialing
1. Press the desired Rapid Key.
Speed Dialing
1. Press
SPEED DIAL
and enter the desired Speed Dial number (press
START/
ENTER
if you entered a 1-digit number).
2. Press
START/
ENTER
.
Direct Keypad Dialing
1. Dial the fax number.
2. Press
START/
ENTER
.
Normal Dialing
1. Lift extension phone or press
SPEAKER
.
2. Dial the fax number (if using an extension phone, dial on the exten-
sion phone keypad).
3. Wait for the reception tone (if a person answers, ask them to press
their Start key).
4. Press
START/
ENTER
.
7. Replacing the Verification Stamp (FO-45VS)
If you are using the Verification Stamp function, you will need to replace
the ink cartridge in the stamp unit when it runs out of ink (when the
stamped mark on original documents becomes faint). A new ink car-
tridge can be obtained from your dealer.
1
Remove the ADF exit tray.
2
Press down on the protruding tab of the green ink cartridge and pull
the cartridge out with your fingers.
3
Insert the new ink cartridge into the machine (make sure that the tab
is facing out).
4
Replace the ADF exit tray.
1
3
2
1 – 11
manuals4you.com manuals4you.com