Sharp FO-4450, Service Manual

Page: 10 / 170

FO-4450U/FO-CS1
Loading paper in the paper cassette (if installed FO-CS1)
Note: To use A4 paper in the paper cassette, you must have a service
technician adjust the cassette.
1
Grasp the hand-hold on the cassette and pull the cassette out until it
stops.
2
Push the pressure plate down until it locks into position.
3
Squeeze the paper guide and pull up to move it to the appropriate
holes for the length of the paper. Push the guide down into the holes.
1
2
4
Place a stack of paper in the cassette, print side up.
•
Make sure the stack of paper is not higher than the two tabs on the
paper guide and the two metal tabs. If it is, remove some of the
paper.
•
If you find it difficult to load the paper, remove the cassette from the
machine. (Pull the cassette out as far as it will go, grasp the left
side of the cassette with your left hand, and then lift it up and out
with both hands.)
5
Push the cassette back into the machine, making sure it clicks into
place.
5. Clearing paper jams
Clearing a jammed document
If the original document doesn’t feed properly during transmission or
copying, or REMOVE ORIGINAL(S) appears in the display, fist try press-
ing
START/
ENTER
. If the document doesn’t feed out, open the operation panel
and remove it.
Important: Do not try to remove a document without opening the opera-
tion panel. This may damage the feeder mechanism.
1
Open the operation panel.
•
Squeeze the release marked PANEL RELEASE and pull up.
2
Remove the document.
3
Close the operation panel, making sure it clicks into place.
1 – 7
manuals4you.com manuals4you.com