manualshive.com logo in svg

Sharp FO-2081, Operation Manual, Page: 165 / 172

Share
Download
Sharp FO-2081 Operation Manual Download Page 165

TROUBLESHOOTING AND MAINTENANCE

164

2

Hold the drum cartridge handle and 
gently pull the cartridge out. Dispose 
of the old drum cartridge in 
accordance with local regulations.

3

Remove the new drum cartridge from the protective bag and 
remove the protective cover from the cartridge. Gently install 
the new drum cartridge.

4

Gently install the TD cartridge. To install the TD cartridge, see 
START GUIDE.

5

Close the front cover and then the side cover by pressing the 
round projections near the side cover open button. The drum 
replacement required error indicator will go out and the ready 
indicator will light up.

Do not touch the surface of the drum (green portion). 
Doing so may cause smudges on the copies.

When closing the covers, be sure to close the front cover securely and 
then close the side cover. If the covers are closed in the wrong order, 
the covers may be damaged.

Drum cartridge handle

Summary of Contents for FO-2081













































































































































































Reviews:

No comments